MECHANICAL AND FATIGUE PROPERTIES OF MARTENSITIC Fe-13Cr AND AUSTENITIC Fe-18Cr-10Ni STEELS IN CONTACT WITH LEAD AND LEAD-BISMUTH MELTS

被引：0
|
作者：
Yaskiv, O. I. [1 ]
Fedirko, V. M. [1 ]
机构：
[1] Natl Acad Sci Ukraine, Physicomech Inst, Lvov, Ukraine
来源：
PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY | 2013年 / 05期
关键词：
D O I：
暂无
中图分类号：
O57 [原子核物理学、高能物理学];
学科分类号：
070202 ;
摘要：
The influence of liquid-metal medium on the mechanical and fatigue properties of Fe-13Cr and Fe-18Cr-10Ni steels in the temperature range 250...750 degrees C. have been investigated. It is shown that liquid metal medium facilitate a decrease in the ultimate strength of Fe-13Cr steel by 10-20% against that in vacuum, and with increase in temperature this effect is enhanced. It has been established that Fe-13Cr steel is susceptible to liquid-metal embrittlement in the temperature range 350...450 degrees C, which manifests itself more substantially in lead-bismuth eutectic. The mechanical properties of Fe-18Cr-10Ni are not considerably affected by heavy metals melts. Liquid metal medium assists in significant decreasing of fatigue life of steels. The Pb-Bi eutectic has more negative impact.
引用
收藏
页码：109 / 118
页数：10
相关论文
共 50 条
  • [21] CREEP-RUPTURE PROPERTIES OF 18CR-10NI AUSTENITIC CAST STEELS
    YAMADA, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S493 - S493
  • [22] A study of microstructural evolution of Fe-18Cr-8Ni, Fe-17Cr-12Ni, and Fe-20Cr-25Ni stainless steels after mechanical alloying and annealing
    Kotan, Hasan
    Darling, Kris A.
    MATERIALS CHARACTERIZATION, 2018, 138 : 186 - 194
  • [23] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF DUPLEX MARTENSITIC-AUSTENITIC FE-NI-TI STEELS
    GORBACH, VG
    JELENKOWSKI, J
    FILIPIUK, J
    MATERIALS SCIENCE AND TECHNOLOGY, 1989, 5 (01) : 36 - 39
  • [24] Oxidative passivation of Fe-Cr-Al steels in lead-bismuth eutectic under oxygen-controlled static conditions at 700° and 800 °C
    Popovic, M. P.
    Bolind, A. M.
    Aussat, Y.
    Gubser, A. J.
    Hosemann, P.
    JOURNAL OF NUCLEAR MATERIALS, 2019, 523 : 172 - 181
  • [25] EFFECTS OF MAGNETIC-FIELDS ON MARTENSITIC-TRANSFORMATION AND SERRATION OF AUSTENITIC FE-NI AND FE-CR-NI STEELS AT 4-K
    KURITA, Y
    EMURA, S
    FUJITA, K
    NAGAI, K
    ISHIKAWA, K
    SHIBATA, K
    FUSION ENGINEERING AND DESIGN, 1993, 20 : 445 - 450
  • [26] INFLUENCE OF LOCAL ORDERING ON MECHANICAL-PROPERTIES OF AUSTENITIC FE-CR-NI ALLOYS
    AIDI, B
    VILTANGE, M
    DIMITROV, O
    JOURNAL OF NUCLEAR MATERIALS, 1990, 175 (1-2) : 96 - 106
  • [27] Grain refinement and mechanical properties of a metastable austenitic Fe-Cr-Ni-Mn alloy
    Ma, YQ
    Jin, JE
    Lee, YK
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 43 - 48
  • [28] EFFECT OF MANGANESE AND NITROGEN ON MECHANICAL-PROPERTIES OF FE-18 PERCENT CR-10 PERCENT NI STAINLESS-STEELS
    FUJIKURA, M
    TAKADA, K
    ISHIDA, K
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1975, 15 (09) : 464 - 469
  • [29] INFLUENCE OF THE SURFACE MECHANICAL PULSED TREATMENT ON THE OXIDATION OF Fe-0.2C-13Cr-0.3Si STEEL IN LEAD MELTS
    Tsisar, V. P.
    Kyryliv, V. I.
    Eliseeva, O. I.
    Voloshyn, V. A.
    MATERIALS SCIENCE, 2009, 45 (05) : 726 - 733
  • [30] Hydrogen desorption and cracking associated with martensitic transformation in Fe-Cr-Ni-Based austenitic steels with different carbon contents
    Koyama, Motomichi
    Ogawa, Takuro
    Yan, Dingshun
    Matsumoto, Yuya
    Tasan, Cemal Cem
    Takai, Kenichi
    Tsuzaki, Kaneaki
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (42) : 26423 - 26435
12345