Effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings

被引：43
|
作者：
Tian, C [1 ]
Law, J
van der Touw, J
Murray, M
Yao, JY
Graham, D
John, DS
机构：
[1] CSIRO, Mfg Sci & Technol, Preston, Vic, Australia
[2] Nissan Casting Australia Pty Ltd, Dandenong, Vic, Australia
[3] CSIRO, Math & Informat Sci, Clayton, Vic 3168, Australia
[4] Univ Queensland, CAST, St Lucia, Qld, Australia
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2002年 / 122卷 / 01期
关键词：
porosity; casting porosity; high pressure die casting; melt cleanliness; inclusions;
D O I：
10.1016/S0924-0136(01)01229-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings (TA Transmission Case) was investigated experimentally. The experiments were conducted under actual industrial production conditions at Nissan Casting Australia Pty Ltd. (NCAP). It was found that the probability of rejection due to excessive porosity present at critical locations in the castings (determined using a real-time X-ray radiographic method) increased as the number of inclusions in the melt (measured with LiMCA II) increased. The types of inclusion in the melt were identified as mainly amorphous oxides, oxide films and sludge particles. (C) 2002 Published by Elsevier Science B.V.
引用
收藏
页码：82 / 93
页数：12
相关论文
共 50 条
  • [41] An Evaluation of Quality Parameters for High Pressure Die castings
    Lumley, R.
    Deeva, N.
    Gershenzon, M.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 121, 2013, 121 : 263 - 280
  • [42] Study of keyhole and melt pool oscillations in dual beam welding of aluminium alloys: effect on porosity formation
    Haboudou, A
    Peyre, P
    Vannes, AB
    FIRST INTERNATIONAL SYMPOSIUM ON HIGH-POWER LASER MACROPROCESSING, 2003, 4831 : 295 - 300
  • [43] The effect of Sr-modification treatment on porosity formation of reduced pressure 319 Al alloy castings
    Miresmaeili, SM
    Shabestari, SG
    Boutorabi, SMA
    CANADIAN METALLURGICAL QUARTERLY, 2003, 42 (02) : 245 - 251
  • [44] A porosity simulation for high pressure die casting
    Kim, Chung-Whee
    Siersma, Ken
    Kubo, Kimio
    SIMULATION OF ALUMINUM SHAPE CASTING PROCESSING: FROM ALLOY DESIGN TO MECHANICAL PROPERTIES, 2006, : 153 - +
  • [45] Formation of the surface layer in hypoeutectic Al-alloy high-pressure die castings
    Otarawanna, S.
    Gourlay, C. M.
    Laukli, H. I.
    Dahle, A. K.
    MATERIALS CHEMISTRY AND PHYSICS, 2011, 130 (1-2) : 251 - 258
  • [46] The Effect of Vacuum Assistance on the Quality of Castings Produced by High Pressure Die Casting Method
    Lagiewka, M.
    Konopka, Z.
    Nadolski, M.
    Zyska, A.
    ARCHIVES OF FOUNDRY ENGINEERING, 2014, 14 (02) : 23 - 26
  • [47] Effect of Melt Cleanliness on the Mechanical Properties and Microstructure on AZ91E Mg Alloy Castings
    A. Elsayed
    C. Ravindran
    Journal of Materials Engineering and Performance, 2014, 23 : 628 - 636
  • [48] Effect of Melt Cleanliness on the Mechanical Properties and Microstructure on AZ91E Mg Alloy Castings
    Elsayed, A.
    Ravindran, C.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (02) : 628 - 636
  • [49] INTELLIGENT PROCESS MODELING AND OPTIMIZATION OF POROSITY FORMATION IN HIGH-PRESSURE DIE CASTING
    Cica, Djordje
    Kramar, Davorin
    INTERNATIONAL JOURNAL OF METALCASTING, 2018, 12 (04) : 814 - 824
  • [50] Intelligent Process Modeling and Optimization of Porosity Formation in High-Pressure Die Casting
    Djordje Cica
    Davorin Kramar
    International Journal of Metalcasting, 2018, 12 : 814 - 824
12345