Effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings

被引：43
|
作者：
Tian, C [1 ]
Law, J
van der Touw, J
Murray, M
Yao, JY
Graham, D
John, DS
机构：
[1] CSIRO, Mfg Sci & Technol, Preston, Vic, Australia
[2] Nissan Casting Australia Pty Ltd, Dandenong, Vic, Australia
[3] CSIRO, Math & Informat Sci, Clayton, Vic 3168, Australia
[4] Univ Queensland, CAST, St Lucia, Qld, Australia
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2002年 / 122卷 / 01期
关键词：
porosity; casting porosity; high pressure die casting; melt cleanliness; inclusions;
D O I：
10.1016/S0924-0136(01)01229-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings (TA Transmission Case) was investigated experimentally. The experiments were conducted under actual industrial production conditions at Nissan Casting Australia Pty Ltd. (NCAP). It was found that the probability of rejection due to excessive porosity present at critical locations in the castings (determined using a real-time X-ray radiographic method) increased as the number of inclusions in the melt (measured with LiMCA II) increased. The types of inclusion in the melt were identified as mainly amorphous oxides, oxide films and sludge particles. (C) 2002 Published by Elsevier Science B.V.
引用
收藏
页码：82 / 93
页数：12
相关论文
共 50 条
  • [31] Local porosity consideration in fatigue life calculation of high pressure die cast aluminium components
    Powazka, Dawid
    Gänser, Hans-Peter
    Egner-Walter, Achim
    Brune, Martin
    Eichlseder, Wilfried
    Oppermann, Helge
    VDI Berichte, 2008, (2031): : 41 - 57
  • [32] A Study of Microstructure and Porosity Formation in High-Pressure Die-Casting
    Matejka, M.
    Bolibruchova, D.
    Podprocka, R.
    ARCHIVES OF FOUNDRY ENGINEERING, 2021, 21 (04) : 127 - 130
  • [33] The Influence of Selected High - Pressure Die Casting Parameters on the Porosity of EN AB-46000 Alloy Castings
    Piatkowski, Jaroslaw
    Roskosz, Stanislaw
    Stach, Sebastian
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (05) : 361 - 371
  • [34] Optimization of porosity formation in AlSi9Cu3 pressure die castings using genetic algorithm analysis
    Tsoukalas, V. D.
    MATERIALS & DESIGN, 2008, 29 (10) : 2027 - 2033
  • [35] Feeding Mechanisms in High-Pressure Die Castings
    S. Otarawanna
    H.I. Laukli
    C.M. Gourlay
    A.K. Dahle
    Metallurgical and Materials Transactions A, 2010, 41 : 1836 - 1846
  • [36] AN EVALUATION OF QUALITY PARAMETERS FOR HIGH PRESSURE DIE CASTINGS
    Lumley, R.
    Deeva, N.
    Gershenzon, M.
    INTERNATIONAL JOURNAL OF METALCASTING, 2011, 5 (03) : 37 - 56
  • [37] Heat Treatment of High-Pressure Die Castings
    R.N. Lumley
    R.G. O’Donnell
    D.R. Gunasegaram
    M. Givord
    Metallurgical and Materials Transactions A, 2007, 38 : 2564 - 2574
  • [38] An Evaluation of Quality Parameters for High Pressure Die Castings
    R. Lumley
    N. Deeva
    M. Gershenzon
    International Journal of Metalcasting, 2011, 5 : 37 - 56
  • [39] Heat treatment of high-pressure die castings
    Lumley, R. N.
    Odonnell, R. G.
    Gunasegaram, D. R.
    Givord, M.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (10): : 2564 - 2574
  • [40] Feeding Mechanisms in High-Pressure Die Castings
    Otarawanna, S.
    Laukli, H. I.
    Gourlay, C. M.
    Dahle, A. K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (07): : 1836 - 1846
12345