Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

被引：7
|
作者：
Hintikka, Jouko [1 ]
Lehtovaara, Arto [1 ]
Mantyla, Antti [2 ]
机构：
[1] Tampere Univ Technol, Dept Mech & Design, FIN-33101 Tampere, Finland
[2] Wartsila Finland Oy, Res & Dev, Vaasa 65101, Finland
来源：
WEAR | 2013年 / 308卷 / 1-2期
关键词：
Fretting fatigue; Quenched and tempered steel; Bronze; Partial slip; Gross sliding; CRACK INITIATION; BEHAVIOR; PREDICTION; WEAR;
D O I：
10.1016/j.wear.2013.07.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Bronze-steel contacts are common in machinery where the loading might give rise to fretting conditions. The flat surfaces of the quenched and tempered steel (QT) specimens were fretted with aluminum bronze spheres in partial slip and gross sliding conditions. The dry friction coefficient was around unity in gross sliding. Material transfer occurred from bronze pad to the QT-specimen and cracks initiated at these locations. Fretting map comparisons with QT-QT fretting tests showed that aluminum bronze-QT contact produces fatigue cracks with lower values in terms of displacement amplitude, tangential force amplitude and Findley cracking risk. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：155 / 165
页数：11
相关论文
共 50 条
  • [31] Effect of contact pressure on fretting fatigue of austenitic stainless steel
    Nakazawa, K
    Maruyama, N
    Hanawa, T
    TRIBOLOGY INTERNATIONAL, 2003, 36 (02) : 79 - 85
  • [32] Evaluation of dislocation density and interstitial carbon content in quenched and tempered steel by internal friction
    Hoyos, J. J.
    Ghilarducci, A. A.
    Mari, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640 : 460 - 464
  • [33] Fretting fatigue of aluminum alloy in contact with steel in oil drill pipe connections, modeling to interpret test results
    Santus, C.
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (04) : 677 - 688
  • [34] Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions
    Fouvry, S
    Kapsa, P
    Vincent, L
    Van, KD
    WEAR, 1996, 195 (1-2) : 21 - 34
  • [35] Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions
    Dept Materiaux Mecanique, CNRS URA 447, Ecole Centrale de Lyon, BP 163, Ecully Cedex 69131, France
    Wear, 1-2 (21-34):
  • [36] Fatigue investigation at high load ratio R of a quenched and tempered chromium molybdenum steel
    Bertini, L.
    Le Bone, L.
    Santus, C.
    Chiesi, F.
    Tognarelli, L.
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 681 - 689
  • [37] LOW-CYCLE FATIGUE BEHAVIOR OF A QUENCHED AND TEMPERED NIOBIUM BEARING HSLA STEEL
    KWUN, SI
    FOURNELLE, RA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1980, 11 (08): : 1429 - 1437
  • [38] Effect of coverage and double peening treatments on the fatigue life of a quenched and tempered structural steel
    Vielma, A. T.
    Llaneza, V.
    Belzunce, F. J.
    SURFACE & COATINGS TECHNOLOGY, 2014, 249 : 75 - 83
  • [39] MICROSTRUCTURE AND FATIGUE-CRACK GROWTH OF QUENCHED AND TEMPERED 23CrNiMoV STEEL
    Zhu, Shuaishuai
    Zhang, Baosen
    Mao, Xiangyang
    Ba, Zhixin
    Dai, Yuming
    Wang, Zhangzhong
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (03): : 385 - 391
  • [40] Shot peening intensity optimization to increase the fatigue life of a quenched and tempered structural steel
    Vielma, A. T.
    Llaneza, V.
    Belzunce, F. J.
    XVII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM17), 2014, 74 : 273 - 278
12345