Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

被引：7

作者：

Hintikka, Jouko ^{[1
]}

Lehtovaara, Arto ^{[1
]}

Mantyla, Antti ^{[2
]}

机构：

[1] Tampere Univ Technol, Dept Mech & Design, FIN-33101 Tampere, Finland

[2] Wartsila Finland Oy, Res & Dev, Vaasa 65101, Finland

来源：

WEAR | 2013年 / 308卷 / 1-2期

关键词：

Fretting fatigue; Quenched and tempered steel; Bronze; Partial slip; Gross sliding; CRACK INITIATION; BEHAVIOR; PREDICTION; WEAR;

D O I：

10.1016/j.wear.2013.07.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Bronze-steel contacts are common in machinery where the loading might give rise to fretting conditions. The flat surfaces of the quenched and tempered steel (QT) specimens were fretted with aluminum bronze spheres in partial slip and gross sliding conditions. The dry friction coefficient was around unity in gross sliding. Material transfer occurred from bronze pad to the QT-specimen and cracks initiated at these locations. Fretting map comparisons with QT-QT fretting tests showed that aluminum bronze-QT contact produces fatigue cracks with lower values in terms of displacement amplitude, tangential force amplitude and Findley cracking risk. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：155 / 165

页数：11

共 50 条

[21] Influence of PTFE-Based Dry Lubricants on Friction and Wear Behavior in Dry Lubricated Steel-Bronze Contact
Kamga, Lionel Simo
Emrich, Stefan
Merz, Rolf
Oehler, Manuel
Gedan-Smolka, Michaela
Kopnarski, Michael
Sauer, Bernd
Koch, Oliver
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (12):
[22] FATIGUE CRACK INITIATION AND PROPAGATION IN A QUENCHED AND TEMPERED NIOBIUM BEARING HSLA STEEL
KWUN, SI
FOURNELLE, RA
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1982, 13 (03): : 393 - 399
[23] Multiaxial fatigue of quenched and tempered U2 steel: Testing and fatigue life prediction
Castro, Fabio C.
Mamiya, Edgar N.
Malcher, Lucival
Canut, Felipe A.
Ferreira, Guilherme V.
Neves, Raniere S.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2019, 42 (11) : 2487 - 2495
[24] Temperature and strain measurements in fatigue tests - Investigations of a quenched and tempered steel.
Schelp, M
Eifler, D
MATERIALPRUFUNG, 2002, 44 (03): : 87 - 94
[25] New fatigue life calculation method for quenched and tempered steel SAE 4140
Starke, Peter
Walther, Frank
Eifler, Dietmar
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 523 (1-2): : 246 - 252
[26] Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen
Korevaar, BM
Coorens, S
Fu, Y
Sietsma, J
Van der Zwaag, S
MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (01) : 54 - 62
[27] Dry friction of pure aluminum against steel
N. M. Rusin
A. L. Skorentsev
E. A. Kolubaev
Journal of Friction and Wear, 2016, 37 : 86 - 93
[28] Dry Friction of Pure Aluminum against Steel
Rusin, N. M.
Skorentsev, A. L.
Kolubaev, E. A.
JOURNAL OF FRICTION AND WEAR, 2016, 37 (01) : 86 - 93
[29] Cyclic variations in friction forces and contact stresses during fretting fatigue
Dominguez, J
WEAR, 1998, 218 (01) : 43 - 53
[30] Effect of contact load on fretting fatigue behaviour of steel wires
Zhang, Z. F.
Zhang, D. K.
Wang, D. G.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2011, 5 (04) : 153 - 157

← 1 2 3 4 5 →