Low-velocity pneumatic conveying in horizontal pipe for coarse particles and fine powders

被引:8
|
作者
Tomita, Yuji [1 ]
Agarwal, Vijay Kumar [2 ]
Asou, Hiroyuki [1 ]
Funatsu, Katsuya [1 ]
机构
[1] Kyushu Inst Technol, Kitakyushu, Fukuoka 8045500, Japan
[2] Indian Inst Technol, New Delhi 110016, India
关键词
Low-velocity conveying; Slug flow; Soft particle; Horizontal fluidized-bed conveying; Fine powder;
D O I
10.1016/j.partic.2008.03.009
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
First, the characteristics of low-velocity conveying of particles having different hardness are experimentally investigated in a horizontal pipeline in terms of flow pattern and pressure drop to show that the slug flow can be classified into two types depending on the settling of particles along the pipeline, and the period is small for slug flow without the settled layer, which is called solitary slug flow. The pressure drop for soft particles is shown to be larger than that for hard particles. Then, experimental results are presented on horizontal fluidized-bed conveying of fine powders to show that air release from the top surface of the conveying channel is an important factor for high mass flow rate of particles. (C) 2008 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:316 / 321
页数:6
相关论文
共 50 条
  • [31] Experimental study on particle fluctuation velocity of a horizontal pneumatic conveying near the minimum conveying velocity
    Rinoshika, Akira
    Yan, Fei
    Kikuchi, Masanori
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2012, 40 : 126 - 135
  • [32] Flow characteristics of coarse particles in horizontal hydraulic conveying
    Uzi, Avi
    Levy, Avi
    POWDER TECHNOLOGY, 2018, 326 : 302 - 321
  • [33] Simplified procedure for pressure drop prediction in low-velocity slug-flow pneumatic conveying
    Univ of Newcastle, New South Wales, Australia
    Powder Handl Process, 4 (367-371):
  • [34] Modelling pressure drop in bends for pneumatic conveying of fine powders
    Sharma, Atul
    Mallick, S. S.
    POWDER TECHNOLOGY, 2019, 356 : 273 - 283
  • [35] Motion of large particles in a horizontal pneumatic pipe
    Tashiro, H
    Tomita, Y
    PARTICULATE SCIENCE AND TECHNOLOGY, 2005, 23 (01) : 33 - 45
  • [36] Characterization of coarse particles contained in fine powders at very low concentrations
    Cho, YI
    Okumiya, M
    Naito, M
    Rabe, T
    Waesche, R
    Morrell, R
    Ewsuk, KG
    Hackley, V
    Freiman, S
    Uematsu, K
    IMPROVED CERAMICS THROUGH NEW MEASUREMENTS, PROCESSING, AND STANDARDS, 2002, 133 : 71 - 76
  • [37] ESTIMATING SOLID PARTICLE VELOCITY IN HORIZONTAL PNEUMATIC CONVEYING LINES
    YANG, WC
    KEAIRNS, DL
    ARCHER, DH
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1973, 51 (06): : 779 - 781
  • [38] CRITICAL SOLIDS TRANSPORT VELOCITY WITH HORIZONTAL PNEUMATIC CONVEYING.
    Wirth, K.E.
    Molerus, O.
    Journal of powder & bulk solids technology, 1986, 9 (01): : 17 - 24
  • [39] PLUG FLOW OF COARSE PARTICLES IN A HORIZONTAL PIPE
    TSUJI, Y
    MORIKAWA, Y
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1982, 104 (02): : 198 - 206
  • [40] Experimental investigation of pressure drop of spherical and non-spherical coarse particles in pneumatic conveying in horizontal pipes
    Chen, Lianjun
    Ma, Hui
    Ma, Guanguo
    Sun, Zhenjiao
    Gao, Kang
    POWDER TECHNOLOGY, 2024, 444