Low-velocity pneumatic conveying in horizontal pipe for coarse particles and fine powders

被引:8
|
作者
Tomita, Yuji [1 ]
Agarwal, Vijay Kumar [2 ]
Asou, Hiroyuki [1 ]
Funatsu, Katsuya [1 ]
机构
[1] Kyushu Inst Technol, Kitakyushu, Fukuoka 8045500, Japan
[2] Indian Inst Technol, New Delhi 110016, India
关键词
Low-velocity conveying; Slug flow; Soft particle; Horizontal fluidized-bed conveying; Fine powder;
D O I
10.1016/j.partic.2008.03.009
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
First, the characteristics of low-velocity conveying of particles having different hardness are experimentally investigated in a horizontal pipeline in terms of flow pattern and pressure drop to show that the slug flow can be classified into two types depending on the settling of particles along the pipeline, and the period is small for slug flow without the settled layer, which is called solitary slug flow. The pressure drop for soft particles is shown to be larger than that for hard particles. Then, experimental results are presented on horizontal fluidized-bed conveying of fine powders to show that air release from the top surface of the conveying channel is an important factor for high mass flow rate of particles. (C) 2008 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:316 / 321
页数:6
相关论文
共 50 条
  • [21] Analysis of gas-solids feeding and slug formation in low-velocity pneumatic conveying
    Li, J
    Pandiella, SS
    Webb, C
    Dyakowski, T
    Jones, MG
    PARTICULATE SCIENCE AND TECHNOLOGY, 2003, 21 (01) : 57 - 73
  • [22] Scale-up technology in low-velocity slug-flow pneumatic conveying
    Guiney, P
    Pan, R
    Chambers, JA
    POWDER TECHNOLOGY, 2002, 122 (01) : 34 - 45
  • [23] The design of low-velocity pneumatic conveying systems for stable and reliable transfer of polymer granules
    Murrell, AE
    Chubb, CC
    Destoop, T
    FROM POWDER TO BULK, 2000, 2000 (03): : 319 - 330
  • [24] LOW VELOCITY PNEUMATIC CONVEYING SYSTEMS
    SCHILDKNECHT, HG
    MARKETING AND MANUFACTURING FOR THE FUTURE, 1987, : 103 - 104
  • [25] COMPARISON OF CORRELATIONS FOR SALTATION VELOCITY IN HORIZONTAL PNEUMATIC CONVEYING
    JONES, PJ
    LEUNG, LS
    INDUSTRIAL & ENGINEERING CHEMISTRY PROCESS DESIGN AND DEVELOPMENT, 1978, 17 (04): : 571 - 575
  • [26] Study on the Influence of Different Factors on Pneumatic Conveying in Horizontal Pipe
    Wang, Chengming
    Li, Wenqi
    Li, Baojun
    Jia, Zezhong
    Jiao, Shihui
    Ma, Hao
    APPLIED SCIENCES-BASEL, 2023, 13 (09):
  • [27] INCIPIENT MOTION OF SOLID PARTICLES IN HORIZONTAL PNEUMATIC CONVEYING
    CABREJOS, FJ
    KLINZING, GE
    POWDER TECHNOLOGY, 1992, 72 (01) : 51 - 61
  • [28] Solid friction coefficient in a horizontal straight pipe of pneumatic conveying
    Zhou, Jiawei
    Ba, Han
    Yan, Xiangyu
    Shangguan, Linjian
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2023, 196 : 577 - 587
  • [29] Characteristics of a horizontal swirling flow pneumatic conveying with a curved pipe
    Li, H
    PARTICULATE SCIENCE AND TECHNOLOGY, 2000, 18 (03) : 187 - 198
  • [30] Research on the Pneumatic Conveying of the Sand in the Horizontal Pipe Based on FLUENT
    Li, Dan-yang
    Liu, Shu
    Wang, Xiao-ning
    CHEMICAL PRODUCT AND PROCESS MODELING, 2016, 11 (02): : 159 - 165