Low-velocity pneumatic conveying in horizontal pipe for coarse particles and fine powders

被引:8
|
作者
Tomita, Yuji [1 ]
Agarwal, Vijay Kumar [2 ]
Asou, Hiroyuki [1 ]
Funatsu, Katsuya [1 ]
机构
[1] Kyushu Inst Technol, Kitakyushu, Fukuoka 8045500, Japan
[2] Indian Inst Technol, New Delhi 110016, India
关键词
Low-velocity conveying; Slug flow; Soft particle; Horizontal fluidized-bed conveying; Fine powder;
D O I
10.1016/j.partic.2008.03.009
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
First, the characteristics of low-velocity conveying of particles having different hardness are experimentally investigated in a horizontal pipeline in terms of flow pattern and pressure drop to show that the slug flow can be classified into two types depending on the settling of particles along the pipeline, and the period is small for slug flow without the settled layer, which is called solitary slug flow. The pressure drop for soft particles is shown to be larger than that for hard particles. Then, experimental results are presented on horizontal fluidized-bed conveying of fine powders to show that air release from the top surface of the conveying channel is an important factor for high mass flow rate of particles. (C) 2008 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:316 / 321
页数:6
相关论文
共 50 条
  • [1] Low-velocity pneumatic conveying in horizontal pipe for coarse particles and fine powders
    Yuji Tomita
    Vijay Kumar Agarwal
    Hiroyuki Asou
    Katsuya Funatsu
    Particuology, 2008, (05) : 316 - 321
  • [2] Low-velocity pneumatic conveying of coarse particles in a horizontal pipe
    Tomita, Y.
    Asou, H.
    POWDER TECHNOLOGY, 2009, 196 (01) : 14 - 21
  • [3] THE INFLUENCE OF PIPE GEOMETRY ON THE CRITICAL VELOCITY OF HORIZONTAL PNEUMATIC CONVEYING OF COARSE PARTICLES
    WIRTH, KE
    MOLERUS, O
    POWDER TECHNOLOGY, 1985, 42 (01) : 27 - 34
  • [4] Experimental study on the solid velocity in horizontal dilute phase pneumatic conveying of fine powders
    Wang Wei
    Guan Qingliang
    Wu Yuxin
    Yang Hairui
    Zhang Jiansheng
    Lu Junfu
    POWDER TECHNOLOGY, 2011, 212 (03) : 403 - 409
  • [5] LOW-VELOCITY PNEUMATIC CONVEYING OF CARBON BLACK.
    Powder and Bulk Engineering, 1988, 2 (03): : 37 - 40
  • [6] LOW-VELOCITY PNEUMATIC CONVEYING OF CARBON-BLACK
    MAIRE, U
    RUBBER CHEMISTRY AND TECHNOLOGY, 1985, 58 (01): : 207 - 208
  • [7] Solids deposition in low-velocity slug flow pneumatic conveying
    Li, J
    Webb, C
    Pandiella, SS
    Campbell, GM
    Dyakowski, T
    Cowell, A
    McGlinchey, D
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2005, 44 (02) : 167 - 173
  • [8] PRESSURE-DROP PREDICTION IN LOW-VELOCITY PNEUMATIC CONVEYING
    MI, B
    WYPCH, PW
    POWDER TECHNOLOGY, 1994, 81 (02) : 125 - 137
  • [9] Towards the control of slug formation in low-velocity pneumatic conveying
    Li, Jintang
    Pandiella, S.S.
    Jones, M.G.
    Powder Handling and Processing, 2002, 14 (03): : 210 - 216
  • [10] Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
    Grbavcic, ZB
    Garic-Grulovic, RV
    Arsenijevic, ZL
    POWDER TECHNOLOGY, 2006, 161 (01) : 1 - 9