Optimization of HSC Compressive Strength by Taguchi Method

被引：1
|
作者：
Hashemi, Seyed Hamid [1 ]
Soleymani, Abed [2 ]
机构：
[1] Arak Univ, Dept Civil Engn, Arak, Iran
[2] Shahid Abbaspoor Univ, Fac Engn, Tehran, Iran
来源：
SUSTAINABLE DEVELOPMENT OF URBAN INFRASTRUCTURE, PTS 1-3 | 2013年 / 253-255卷
关键词：
High Strength Concrete; Taguchi method; Orthogonal Array;
D O I：
10.4028/www.scientific.net/AMM.253-255.572
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
High strength concrete (HSC) has large application because of good performance and high durability. Optimizing mix proportions has main effect on the compressive strength of HSC. In this paper, optimizing mix proportions are investigated by Taguchi method, factors of water to cementitious material ratio (W/C), fine aggregate to total aggregate ratio (FI/AG), silica fume as supplementary cementitious material and cementitious material content were selected at three levels. After testing L-9 orthogonal array and analyzing results by Taguchi method, the best optimized mix levels were predicted by Taguchi. Then optimum mix was constructed and tested. It was concluded Taguchi forecast is true about optimized mix levels.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [41] Optimization of the slub yarn tensile strength with Taguchi techniques
    Altas, Sevda
    Ozgen, Banu
    INDUSTRIA TEXTILA, 2015, 66 (06): : 335 - 339
  • [42] Optimization Parameter Effects on the Strength of 3D-Printing Process using Taguchi Method
    Radhwan, H.
    Shayfull, Z.
    Abdellah, Abdellah El-Hadj
    Irfan, A. R.
    Kamarudin, K.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [43] Adhesion strength optimization of slurry sprayed mullite-based coating using Taguchi method
    Verma, Rajeev
    Kant, Suman
    Suri, Narendra M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2016, 230 (02) : 87 - 96
  • [44] Optimization of early flexural strength of pavement concrete with silica fume and fly ash by the Taguchi method
    Hinislioglu, S
    Bayrak, OÜ
    CIVIL ENGINEERING AND ENVIRONMENTAL SYSTEMS, 2004, 21 (02) : 79 - 90
  • [45] Optimization of Variables Influencing the Thermal Conductivity and Fracture Strength of Reinforced PMMA by Using the Taguchi Method
    Kul, Esra
    Yesildal, Faruk
    Mandev, Emre
    Celik, Cafer
    MATERIALE PLASTICE, 2020, 57 (03) : 137 - 146
  • [46] Influences of Parameters on Slump Flow and Compressive Strength Properties of Aluminosilicate Based Flowable Geopolymer Concrete Using Taguchi Method
    Jithendra, C.
    Elavenil, S.
    SILICON, 2020, 12 (03) : 595 - 602
  • [47] Influences of Parameters on Slump Flow and Compressive Strength Properties of Aluminosilicate Based Flowable Geopolymer Concrete Using Taguchi Method
    C. Jithendra
    S. Elavenil
    Silicon, 2020, 12 : 595 - 602
  • [48] Compressive Mechanical of High Strength Concrete (HSC) after Different High Temperature History
    Zhao, Dongfu
    Liu, Yuchen
    Gao, Haijing
    Han, Xiao
    GREEN ENERGY AND SUSTAINABLE DEVELOPMENT I, 2017, 1864
  • [49] A discrete micromechanical model for predicting HSC compressive strength based on a yield design approach
    Naija, Ahmed
    Miled, Karim
    Limam, Oualid
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 175 : 714 - 725
  • [50] Sensitivity of compressive strength of HSC to hot-dry climate, curing regimes, and additives
    Alsayed, SH
    ACI MATERIALS JOURNAL, 1997, 94 (06) : 472 - 477
12345