Optimization of HSC Compressive Strength by Taguchi Method

被引：1
|
作者：
Hashemi, Seyed Hamid [1 ]
Soleymani, Abed [2 ]
机构：
[1] Arak Univ, Dept Civil Engn, Arak, Iran
[2] Shahid Abbaspoor Univ, Fac Engn, Tehran, Iran
来源：
SUSTAINABLE DEVELOPMENT OF URBAN INFRASTRUCTURE, PTS 1-3 | 2013年 / 253-255卷
关键词：
High Strength Concrete; Taguchi method; Orthogonal Array;
D O I：
10.4028/www.scientific.net/AMM.253-255.572
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
High strength concrete (HSC) has large application because of good performance and high durability. Optimizing mix proportions has main effect on the compressive strength of HSC. In this paper, optimizing mix proportions are investigated by Taguchi method, factors of water to cementitious material ratio (W/C), fine aggregate to total aggregate ratio (FI/AG), silica fume as supplementary cementitious material and cementitious material content were selected at three levels. After testing L-9 orthogonal array and analyzing results by Taguchi method, the best optimized mix levels were predicted by Taguchi. Then optimum mix was constructed and tested. It was concluded Taguchi forecast is true about optimized mix levels.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [31] Optimization of Tensile Strength of Titanium Plates Jointed Resistance Spot Welding with Taguchi Method
    Yidirim, Mehmet Serkan
    Kaya, Yakup
    Cakiroglu, Ramazan
    Gulenc, Behcet
    Kahraman, Nizamettin
    Durgutlu, Ahmet
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2019, 22 (03): : 567 - 573
  • [32] Optimization of weld strength for laser welding of steel to PMMA using Taguchi design method
    Huang, Yijie
    Gao, Xiangdong
    Ma, Bo
    Liu, Guiqian
    Zhang, Nanfeng
    Zhang, Yanxi
    You, Deyong
    OPTICS AND LASER TECHNOLOGY, 2021, 136
  • [33] Application of the Taguchi method for the optimization of the strength of polyamide 6 composite hot plate welds
    Ulker, Aydin
    Kocatufek, Umut Emrah
    Sayer, Sami
    Yeni, Cinar
    MATERIALS TESTING, 2015, 57 (06) : 531 - 542
  • [34] Optimization of FDM manufacturing parameters for the compressive behavior of cubic lattice cores: an experimental approach by Taguchi method
    Rahman, Md Mazedur
    Sultana, Jakiya
    Rayhan, Saiaf Bin
    Ahmed, Ammar
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (3-4): : 1329 - 1343
  • [35] Optimization of FDM manufacturing parameters for the compressive behavior of cubic lattice cores: an experimental approach by Taguchi method
    Md Mazedur Rahman
    Jakiya Sultana
    Saiaf Bin Rayhan
    Ammar Ahmed
    The International Journal of Advanced Manufacturing Technology, 2023, 129 : 1329 - 1343
  • [36] THE INFLUENCE OF MICROWAVE INCINERATED RICE HUSK ASH ON FOAMED CONCRETE WORKABILITY AND COMPRESSIVE STRENGTH USING TAGUCHI METHOD
    Bayuaji, Ridho
    JURNAL TEKNOLOGI, 2015, 75 (01): : 265 - 274
  • [37] Taguchi regression analysis and constrained particle swarm optimization for amended unconfined compressive strength (UCS) of expansive subgrade soil
    Chijioke Christopher Ikeagwuani
    Chukwuebuka Chigozie Akanno
    Arabian Journal of Geosciences, 2023, 16 (6)
  • [38] Fuzzy logic modeling of compressive strength of high-strength concrete (HSC) with supplementary cementitious material
    Aggarwal, Paratibha
    Aggarwal, Yogesh
    Siddique, Rafat
    Gupta, Sakshi
    Garg, Harshit
    JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS, 2013, 2 (02) : 128 - 143
  • [39] A Gradient Taguchi Method for Engineering Optimization
    Hwang, Shun-Fa
    Wu, Jen-Chih
    He, Rong-Song
    5TH ASIA CONFERENCE ON MECHANICAL AND MATERIALS ENGINEERING (ACMME 2017), 2017, 241
  • [40] Optimization of sizing parameters with taguchi method
    Sabir, Emel Ceyhun
    Sarpkaya, Cigdem
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2016, 41 (01) : 73 - 77
12345