Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing

被引：132
|
作者：
Devaraju, A. [1 ]
Kumar, A. [1 ]
Kotiveerachari, B. [1 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Warangal 506004, Andhra Pradesh, India
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2013年 / 23卷 / 05期
关键词：
aluminum alloy; hybrid composite; friction stir processing; wear; solid lubricant; microstructure; SURFACE; NI;
D O I：
10.1016/S1003-6326(13)62593-5
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Aluminum alloy base surface hybrid composites were fabricated by incorporating with mixture of (SiC+Gr) and (SiC+Al2O3) particles of 20 mu m in average size on an aluminum alloy 6061-T6 plate using friction stir processing (FSP). Microstructures of both the surface hybrid composites revealed that SiC, Gr and Al2O3 are uniformly dispersed in the nugget zone (NZ). It was observed that the addition of Gr particles rather than Al2O3 particles with SiC particles, decreases the microhardness but immensely increases the dry sliding wear resistance of aluminum alloy 6061-T6 surface hybrid composite. The observed microhardness and wear properties are correlated with microstructures and worn micrographs.
引用
收藏
页码：1275 / 1280
页数：6
相关论文
共 50 条
  • [31] Microstructure, mechanical properties and fatigue crack growth behavior of friction stir welded joint of 6061-T6 aluminum alloy
    Zhang, Lan
    Zhong, Huilong
    Li, Shengci
    Zhao, Hongjin
    Chen, Jiqiang
    Qi, Liang
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 135
  • [32] Wear behaviour of Al/(Al2O3p+SiCp) hybrid composites
    Ahlatci, H
    Koçer, T
    Candan, E
    Çimenoglu, H
    TRIBOLOGY INTERNATIONAL, 2006, 39 (03) : 213 - 220
  • [33] THE EFFECT OF STRAIN-RATE ON THE TENSILE PROPERTIES OF AN AL2O3P/6061-T6 ALUMINUM METAL-MATRIX COMPOSITE AT LOW-TEMPERATURES
    PERNG, CC
    HWANG, JR
    DOONG, JL
    SCRIPTA METALLURGICA ET MATERIALIA, 1993, 29 (03): : 311 - 316
  • [34] Mechanical and corrosion characteristics of 6061-T6 aluminum alloy samples reinforced with alumina micro and nanoparticles fabricated by friction stir processing
    Karami, Ramin
    Abdollahi, Mir Ali Asghar
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (16) : 3587 - 3596
  • [35] Wear properties of stir cast and hot extruded Mg-6Zn-1Ca/Al2O3p composites
    Jafari, Hassan
    Mazloumian, Alireza
    Fallah, Mohammad Meghdad
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2021, 127 (08):
  • [36] Characterization of anomalous tool degradation during friction stir processing of 6061-T6 aluminum alloy extrusions: A failure analysis study
    Netto, Nelson
    Tiryakioglu, Murat
    Eason, Paul
    ENGINEERING FAILURE ANALYSIS, 2019, 99 : 1 - 6
  • [37] ELEVATED-TEMPERATURE, LOW-CYCLE FATIGUE BEHAVIOR OF AN AL2O3P/6061-T6 ALUMINUM-MATRIX COMPOSITE
    PERNG, CC
    HWANG, JR
    DOONG, JL
    COMPOSITES SCIENCE AND TECHNOLOGY, 1993, 49 (03) : 225 - 236
  • [38] Wear properties of stir cast and hot extruded Mg-6Zn-1Ca/Al2O3p composites
    Hassan Jafari
    Alireza Mazloumian
    Mohammad Meghdad Fallah
    Applied Physics A, 2021, 127
  • [39] Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation
    Mohammad Riahi
    Hamidreza Nazari
    The International Journal of Advanced Manufacturing Technology, 2011, 55 : 143 - 152
  • [40] Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation
    Riahi, Mohammad
    Nazari, Hamidreza
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 55 (1-4): : 143 - 152
12345