Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing

被引：132

作者：

Devaraju, A. ^{[1
]}

Kumar, A. ^{[1
]}

Kotiveerachari, B. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Mech Engn, Warangal 506004, Andhra Pradesh, India

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2013年 / 23卷 / 05期

关键词：

aluminum alloy; hybrid composite; friction stir processing; wear; solid lubricant; microstructure; SURFACE; NI;

D O I：

10.1016/S1003-6326(13)62593-5

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Aluminum alloy base surface hybrid composites were fabricated by incorporating with mixture of (SiC+Gr) and (SiC+Al2O3) particles of 20 mu m in average size on an aluminum alloy 6061-T6 plate using friction stir processing (FSP). Microstructures of both the surface hybrid composites revealed that SiC, Gr and Al2O3 are uniformly dispersed in the nugget zone (NZ). It was observed that the addition of Gr particles rather than Al2O3 particles with SiC particles, decreases the microhardness but immensely increases the dry sliding wear resistance of aluminum alloy 6061-T6 surface hybrid composite. The observed microhardness and wear properties are correlated with microstructures and worn micrographs.

引用

页码：1275 / 1280

页数：6

共 50 条

[21] Dry Sliding Wear Performance of Al/7075/Al2O3p/Grp Hybrid Metal Matrix Composites
Anitha, P.
Balraj, U. Shrinivas
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 3033 - 3042
[22] The Effect of Cooling Temperature on Microstructure and Mechanical Properties of Al 6061-T6 Aluminum Alloy during Submerged Friction Stir Welding
Wakchaure, Kiran
Chaudhari, Rakesh
Thakur, Ajaykumar
Fuse, Kishan
Lopez de Lacalle, Luis Norberto
Vora, Jay
METALS, 2023, 13 (07)
[23] Solid-State Infiltration of 6061-T6 Aluminum Alloy Into Carbon Fibers Via Friction Stir Welding
Franke, Daniel J.
Morrow, Justin D.
Zinn, Michael R.
Pfefferkorn, Frank E.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (11):
[24] Role of hybrid ratio in microstructural, mechanical and sliding wear properties of the Al5083/Graphitep/Al2O3p a surface hybrid nanocomposite fabricated via friction stir processing method
Asl, A. Mostafapour
Khandani, S. T.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 549 - 557
[25] Microstructures and mechanical properties of 6061-T6 aluminum alloy welded by stationary shoulder friction stir welding process
Shen, Hao
Yang, Xinqi
Li, Dongxiao
Cui, Lei
Hanjie Xuebao/Transactions of the China Welding Institution, 2016, 37 (05): : 119 - 123
[26] Effect of Welding Speeds on Mechanical Properties of Level Compensation Friction Stir Welded 6061-T6 Aluminum Alloy
Wen, Quan
Yue, Yumei
Ji, Shude
Li, Zhengwei
Gao, Shuangsheng
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2016, 35 (04) : 375 - 379
[27] DRY SLIDING WEAR BEHAVIOUR OF Al6063/Al2O3P/GrP HYBRID METAL MATRIX COMPOSITES
Saravanakumar, A.
Sasikumar, P.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2016, 22 (02): : 1241 - 1252
[28] Characterization of Microstructural Refinement and Hardness Profile Resulting from Friction Stir Processing of 6061-T6 Aluminum Alloy Extrusions
Netto, Nelson
Tiryakioglu, Murat
Eason, Paul D.
METALS, 2018, 8 (07):
[29] Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy
Zhou, L.
Luo, L. Y.
Zhang, T. P.
He, W. X.
Huang, Y. X.
Feng, J. C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 3425 - 3433
[30] Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy
L. Zhou
L. Y. Luo
T. P. Zhang
W. X. He
Y. X. Huang
J. C. Feng
The International Journal of Advanced Manufacturing Technology, 2017, 92 : 3425 - 3433

← 1 2 3 4 5 →