Acoustic emission study of fatigue crack closure of physical short and long cracks for aluminum alloy LY12CZ

被引：56

作者：

Chang, H. ^{[1
]}

Han, E. H. ^{[1
]}

Wang, J. Q. ^{[1
]}

Ke, W. ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Met Res, Environm Corros Ctr, Shenyang 110016, Peoples R China

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2009年 / 31卷 / 03期

关键词：

Crack Closure; Physical short crack; Acoustic emission; Aluminum alloy LY12CZ; FINITE-ELEMENT-ANALYSIS; THRESHOLD;

D O I：

10.1016/j.ijfatigue.2008.08.008

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Crack closure of physical short and long cracks of LY12CZ aluminum alloy during fatigue process was investigated using acoustic emission (AE) technique. Results showed that the effective fatigue crack growth curve (da/dN vs. Delta K(eff)) of physical short and long cracks obtained by the AE technique was consistent with the effective fatigue crack growth Curve at high stress ratio (R = 0.8), which implied that the AE technique Could measure the crack closure level, especially for physical short crack. The growth rate of physical short crack was Much higher than that of long crack at the same Delta K, and the lower crack Closure level of short crack was the main reason. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：403 / 407

页数：5

共 50 条

[31] Three organic corrosion inhibitors on LY12CZ aluminum alloy in acid solution
Liu, Jian-Hua
Sheng, Hua
Li, Ming
Li, Song-Mei
Yu, Mei
Cailiao Gongcheng/Journal of Materials Engineering, 2011, (05): : 41 - 47
[32] Study on grain boundary morphology in commercial LY12CZ aluminum alloy during superplastic deformation
Xu, Xiao-Chang
Wu, Chun
Liu, Zhi-Yi
Jinshu Rechuli/Heat Treatment of Metals, 2004, 29 (07):
[33] Infrared thermography for non-destructive evaluation of aluminum alloy LY12CZ under low cycle fatigue
Li, Bin
Tong, Xiaoyan
Li, Zishan
Cheng, Qiyou
Yao, Leijiang
TRANSFERABILITY AND APPLICABILITY OF CURRENT MECHANICS APPROACHES, 2009, : 483 - 487
[34] CRACK CLOSURE AND THE GROWTH OF SHORT AND LONG FATIGUE CRACKS
MCEVILY, AJ
MINAKAWA, K
SCRIPTA METALLURGICA, 1984, 18 (01): : 71 - 76
[35] Fatigue damage rule of LY12CZ aluminium alloy under sequential biaxial loading
Wang YingYu
Zhang DaChuan
Yao WeiXing
SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY, 2014, 57 (01) : 98 - 103
[36] Effect of different temperature and strain rates on thin plate aluminum alloy LY12CZ
Xu, F.
Liu, B.
Liu, Y.-Y.
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2001, 21 (01): : 27 - 31
[37] Fatigue damage rule of LY12CZ aluminium alloy under sequential biaxial loading
YingYu Wang
DaChuan Zhang
WeiXing Yao
Science China Physics, Mechanics and Astronomy, 2014, 57 : 98 - 103
[38] Process optimization on TIG welding of LY12CZ aluminum alloy with hammering and rolling technique
Zhao Zheng
Li Jinglong
Li Ming
RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (03) : 525 - 529
[39] Galvanic corrosion between graphite epoxy composite materials and LY12CZ aluminum alloy
Lu, F.
Shen, W.Y.
Li, J.G.
Zhen, W.D.
Acta Metallurgica Sinica (English Letters), 1996, 9 (06):
[40] Pitting of LY12CZ aluminum alloy under corrosion-deformation interactions (CDI)
Rao, Sixian
Wei, Wei
Chen, Xuedong
STRUCTURAL INTEGRITY IN NUCLEAR ENGINEERING, 2011, : 339 - 344

← 1 2 3 4 5 →