Robust design application for optimizing ABS fused filament fabrication process: A case study

被引：10
|
作者：
Tsiolikas, A. [1 ]
Mikrou, T. [1 ]
Vakouftsi, F. [1 ]
Aslani, K. E. [1 ]
Kechagias, J. [1 ]
机构：
[1] Univ Thessaly, Lab Mfg Proc & Machine Tools, Larisa 41110, Greece
来源：
INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI | 2019年 / 564卷
关键词：
D O I：
10.1088/1757-899X/564/1/012021
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The current paper is a case study of optimizing fused filament fabrication (FFF) process using robust design. FFF process is a low cost 3d printing process that uses ABS (Acrylonitrile-Butadiene-Styrene) filament in order to build progressive layer by layer, physical prototypes. Four (4) parameters having three levels each ones is used (Deposition angle, Layer thickness, Infill ratio, Infill pattern). The quality indicator that used for the optimization process is the dimensional accuracy. It was found that the layer thickness is the most important parameter in the reported experimental area.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Preparation and characterization of thermally stable ABS/HDPE blend for fused filament fabrication
    Harris, Muhammad
    Potgieter, Johan
    Ray, Sudip
    Archer, Richard
    Arif, Khalid Mahmood
    MATERIALS AND MANUFACTURING PROCESSES, 2020, 35 (02) : 230 - 240
  • [22] Investigating the effect of process parameters for fused filament fabrication
    Boumedine, Asma
    Lecheb, Samir
    Benfriha, Khaled
    Omnes, Pascal
    PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (06) : 1147 - 1160
  • [23] Effects of surface treatments on ABS mechanical properties from fused filament fabrication
    Shen, Jing-Jing
    Patterson, Matthew Robert
    Marshall, Erin
    Dvorak, Jake
    Romberg, Stian
    Schmitz, Tony
    MANUFACTURING LETTERS, 2022, 33 : 719 - 731
  • [24] Effects of surface treatments on ABS mechanical properties from fused filament fabrication
    Shen J.-J.
    Robert Patterson M.
    Marshall E.
    Dvorak J.
    Romberg S.
    Schmitz T.
    Manufacturing Letters, 2022, 33 : 719 - 731
  • [25] An Investigation on Process Capability Analysis for Fused Filament Fabrication
    Gunay, Elif Elcin
    Velineni, Anusha
    Park, Kijung
    Kremer, Gul E. Okudan
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2020, 21 (04) : 759 - 774
  • [26] Predicting the neck size in the fused filament fabrication process
    Esfahani, Ali Karimnejad
    Taheri, Zahra
    Ramiar, Abas
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (1-2): : 67 - 86
  • [27] Investigating the effect of process parameters for fused filament fabrication
    Asma Boumedine
    Samir Lecheb
    Khaled Benfriha
    Pascal Omnes
    Progress in Additive Manufacturing, 2023, 8 : 1147 - 1160
  • [28] In situ monitoring for fused filament fabrication process: A review
    Fu, Yanzhou
    Downey, Austin
    Yuan, Lang
    Pratt, Avery
    Balogun, Yunusa
    ADDITIVE MANUFACTURING, 2021, 38
  • [29] Mechanical properties of PLA and ABS parts produced with fused filament fabrication method
    Topcu, Ismail
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (02): : 143 - 148
  • [30] Effects of surface treatments on ABS mechanical properties from fused filament fabrication
    Shen, Jing-Jing
    Patterson, Matthew Robert
    Marshall, Erin
    Dvorak, Jake
    Romberg, Stian
    Schmitz, Tony
    MANUFACTURING LETTERS, 2022, 33 : 719 - 731
12345