Robust design application for optimizing ABS fused filament fabrication process: A case study

被引：10

作者：

Tsiolikas, A. ^{[1
]}

Mikrou, T. ^{[1
]}

Vakouftsi, F. ^{[1
]}

Aslani, K. E. ^{[1
]}

Kechagias, J. ^{[1
]}

机构：

[1] Univ Thessaly, Lab Mfg Proc & Machine Tools, Larisa 41110, Greece

来源：

INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI | 2019年 / 564卷

关键词：

D O I：

10.1088/1757-899X/564/1/012021

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The current paper is a case study of optimizing fused filament fabrication (FFF) process using robust design. FFF process is a low cost 3d printing process that uses ABS (Acrylonitrile-Butadiene-Styrene) filament in order to build progressive layer by layer, physical prototypes. Four (4) parameters having three levels each ones is used (Deposition angle, Layer thickness, Infill ratio, Infill pattern). The quality indicator that used for the optimization process is the dimensional accuracy. It was found that the layer thickness is the most important parameter in the reported experimental area.

引用

页数：6

共 50 条

[11] Mechanical properties of treated kenaf/ABS composites fused filament fabrication
Mastura, M. T.
Noryani, M.
Kasim, M. L.
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20), 2020, : 72 - 73
[12] Fabrication of ABS/Graphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing
Aumnate, C.
Pongwisuthiruchte, A.
Pattananuwat, P.
Potiyaraj, P.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
[13] Design of a Set of Geometries and Templates for the Analysis of Surface in the Process of Fused Filament Fabrication
Aguilar-Duque, Julian, I
Hernandez-Arellano, Juan L.
Balderrama-Armendariz, Cesar
Avelar, Liliana
ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, 2020, 975 : 428 - 438
[14] A study on extruded filament bonding in fused filament fabrication
Costa, Ana Elisa
da Silva, Alexandre Ferreira
Carneiro, Olga Sousa
RAPID PROTOTYPING JOURNAL, 2019, 25 (03) : 555 - 565
[15] Thermal Layer Design in Fused Filament Fabrication
Bjorken, Olav U.
Andresen, Benjamin
Eikevag, Sindre W.
Steinert, Martin
Elverum, Christer W.
APPLIED SCIENCES-BASEL, 2022, 12 (14):
[16] DESIGN FOR FUSED FILAMENT FABRICATION ADDITIVE MANUFACTURING
Steuben, John
Van Bossuyt, Douglas L.
Turner, Cameron
INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 4, 2016,
[17] Design methodology for fused filament fabrication with failure theory: framework, database, design rule, methodology and study of case
Taborda, Luis Lisandro Lopez
Maury, Heriberto
Esparragoza, Ivan E.
RAPID PROTOTYPING JOURNAL, 2024, 30 (09) : 1803 - 1821
[18] Tensile behavior of functionally graded sandwich PLA-ABS produced via fused filament fabrication process
Caliskan, Umut
Sevim, Caglar
Demirbas, Munise Didem
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (01) : 261 - 270
[19] Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused filament fabrication with consumer-grade ABS
de Oliveira, Tarcisio Ladeia
de Carvalho, Jonas
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (09)
[20] Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused filament fabrication with consumer-grade ABS
Tarcísio Ladeia de Oliveira
Jonas de Carvalho
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43

← 1 2 3 4 5 →