Robust design application for optimizing ABS fused filament fabrication process: A case study

被引：10

作者：

Tsiolikas, A. ^{[1
]}

Mikrou, T. ^{[1
]}

Vakouftsi, F. ^{[1
]}

Aslani, K. E. ^{[1
]}

Kechagias, J. ^{[1
]}

机构：

[1] Univ Thessaly, Lab Mfg Proc & Machine Tools, Larisa 41110, Greece

来源：

INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI | 2019年 / 564卷

关键词：

D O I：

10.1088/1757-899X/564/1/012021

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The current paper is a case study of optimizing fused filament fabrication (FFF) process using robust design. FFF process is a low cost 3d printing process that uses ABS (Acrylonitrile-Butadiene-Styrene) filament in order to build progressive layer by layer, physical prototypes. Four (4) parameters having three levels each ones is used (Deposition angle, Layer thickness, Infill ratio, Infill pattern). The quality indicator that used for the optimization process is the dimensional accuracy. It was found that the layer thickness is the most important parameter in the reported experimental area.

引用

页数：6

共 50 条

[1] Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process
Breski, Tomislav
Hentschel, Lukas
Godec, Damir
Duretek, Ivica
TEHNICKI GLASNIK-TECHNICAL JOURNAL, 2021, 15 (04): : 491 - 497
[2] Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication
Sardinha, Manuel
Lopes, Jose
Gusmao, Afonso
Reis, Luis
Leite, Marco
23 EUROPEAN CONFERENCE ON FRACTURE, ECF23, 2022, 42 : 1274 - 1281
[3] Process-structure-property effects on ABS bond strength in fused filament fabrication
Abbott, A. C.
Tandon, G. P.
Bradford, R. L.
Koerner, H.
Baur, J. W.
ADDITIVE MANUFACTURING, 2018, 19 : 29 - 38
[4] Establishing a Framework for Fused Filament Fabrication Process Optimization: A Case Study with PLA Filaments
Grubbs, Jack
Sousa, Bryer C.
Cote, Danielle L.
POLYMERS, 2023, 15 (08)
[5] Failure surface development for ABS fused filament fabrication parts
Capote, Gerardo A. Mazzei
Rudolph, Natalie M.
Osswald, Paul, V
Osswald, Tim A.
ADDITIVE MANUFACTURING, 2019, 28 : 169 - 175
[6] Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication
Domingo-Espin, Miquel
Antonio Travieso-Rodriguez, J.
Jerez-Mesa, Ramn
Lluma-Fuentes, Jordi
MATERIALS, 2018, 11 (12)
[7] A review of fused filament fabrication (FFF): Process parameters and their impact on the tribological behavior of polymers (ABS)
Kaur, Gulshan
Singari, Ranganath M.
Kumar, Harish
MATERIALS TODAY-PROCEEDINGS, 2022, 51 : 854 - 860
[8] IN-SITU TEMPERATURE MONITORING OF ABS DURING FUSED FILAMENT FABRICATION (FFF) PROCESS WITH VARYING PROCESS PARAMETERS
Mahmoud, Youmna
Manoochehri, Souran
PROCEEDINGS OF ASME 2021 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2021, VOL 3A, 2021,
[9] Hybrid heating in the fused filament fabrication process
Savu, Ionel Danut
Savu, Sorin Vasile
Sirbu, Nicusor-Alin
WELDING IN THE WORLD, 2025, 69 (04) : 897 - 914
[10] Process control testing for fused filament fabrication
Akande, Stephen Oluwashola
Dalgarno, Kenny
Munguia, Javier
RAPID PROTOTYPING JOURNAL, 2017, 23 (02) : 246 - 256

← 1 2 3 4 5 →