The tribological characteristics of polyimide bonded solid lubricating films under different lubrication conditions

被引：2

作者：

Ye Yinping ^{[1
]}

Yang Ruijie ^{[2
]}

Wan Hongqi ^{[1
]}

Chen Jianmin ^{[1
]}

Zhou Huidi ^{[1
]}

机构：

[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China

[2] Lanzhou Univ, Coll Chem & Chem Engn, Lanzhou 730000, Peoples R China

来源：

NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3 | 2012年 / 399-401卷

关键词：

Bonded solid lubricating film; Tribological behaviors; Viscosity; Boiling point; WEAR BEHAVIORS; COATINGS; FRICTION; CONTACT; DRY;

D O I：

10.4028/www.scientific.net/AMR.399-401.2026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the tribological behaviors of polyimide bonded PTFE solid lubricating film and polyimide bonded MoS2 solid lubricating film under dry sliding and under lubrication of kerosene oil, diesel fuel, paraffin liquid and lubrication oil were investigated by using a ring-on-block wear tester. The results show that the anti-friction and wear-resistance properties of both lubricating films are greatly improved under oil lubrication conditions as compared with the dry friction condition; the friction coefficients of both lubricating films under different oil lubrications keep steady-state value with 0.08; but both lubricating films under different oil lubrications reveal the different wear-resistance properties, such as the best wear-resistance properties under diesel fuel, followed by paraffin liquid, lubrication oil and kerosene oil; the differences in the wear-resistance properties of the lubricating films under different lubrication conditions are mainly ascribed to the influence of the oil's characteristics, especially boiling point and viscosity.

引用

页码：2026 / +

页数：2

共 50 条

[31] SUSTAINABLE MACHINING CHARACTERISTICS EVALUATION OF BORING OPERATION UNDER DIFFERENT LUBRICATING CONDITIONS
Hassan, Kamal
Kang, Amardeep Singh
Prakash, Chander
Singh, Gurraj
SURFACE REVIEW AND LETTERS, 2022, 29 (09)
[32] Effect of different chemical conversion coatings on the tribological performance of cylindrical thrust roller bearings under conditions of dry friction and solid lubrication
Xu, Xiao
Zhang, Yimin
WEAR, 2024, 548
[33] Investigation of tribological characteristics of nickel alloybased solid-lubricating composites at elevated temperatures under vacuum
Jinming ZHEN
Jun CHENG
Hui TAN
Qichun SUN
Shengyu ZHU
Jun YANG
Weimin LIU
Friction, 2021, 9 (05) : 990 - 1001
[34] The tribological performance of BCN films under ionic liquids lubrication
Chen, Y. M.
Zeng, Z. X.
Yang, S. R.
Zhang, J. Y.
DIAMOND AND RELATED MATERIALS, 2009, 18 (01) : 20 - 26
[35] Tribological Properties of WC-Reinforced Ni-Based Coatings Under Different Lubricating Conditions
Xiang Wang
Lufa Zhu
Zhiming Zhou
Gang Liu
Eryong Liu
Zhixiang Zeng
Xuedong Wu
Journal of Thermal Spray Technology, 2015, 24 : 1323 - 1332
[36] Tribological Properties of WC-Reinforced Ni-Based Coatings Under Different Lubricating Conditions
Wang, Xiang
Zhu, Lufa
Zhou, Zhiming
Liu, Gang
Liu, Eryong
Zeng, Zhixiang
Wu, Xuedong
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, 24 (07) : 1323 - 1332
[37] Characterization of the lubricating action of oils under boundary lubrication conditions(C)
Univ of Technology Delft and Univ of, Twente, Amsterdam, Netherlands
Tribol Trans, 3 (565-570):
[38] Tribological performance of PPS composites under diesel lubrication conditions
Zhang, Ding
Qi, Huimin
Zhao, Fuyan
Zhang, Ga
Wang, Tingmei
Wang, Qihua
TRIBOLOGY INTERNATIONAL, 2017, 115 : 338 - 347
[39] Tribological behaviors of epoxy composites under water lubrication conditions
Gao, C. P.
Guo, G. F.
Zhao, F. Y.
Wang, T. M.
Jim, B.
Wetzel, B.
Zhang, G.
Wang, Q. H.
TRIBOLOGY INTERNATIONAL, 2016, 95 : 333 - 341
[40] Tribological behavior of carbon-fiber-reinforced polyimide composites under water lubrication
Jia, Jun-Hong
Zhou, Hui-Di
Gao, Sheng-Qiang
Zhou, Hua
Chen, Jian-Min
Mocaxue Xuebao/Tribology, 2002, 22 (04): : 273 - 276

← 1 2 3 4 5 →