Investigation of tribological characteristics of nickel alloybased solid-lubricating composites at elevated temperatures under vacuum

被引:1
|
作者
Jinming ZHEN [1 ,2 ]
Jun CHENG [2 ]
Hui TAN [2 ]
Qichun SUN [2 ]
Shengyu ZHU [2 ]
Jun YANG [2 ]
Weimin LIU [2 ]
机构
[1] College of Materials Science and Engineering, Liaocheng University
[2] State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TB333 [金属-非金属复合材料];
学科分类号
摘要
The development of a high-performance solid-lubricating composite with excellent self-lubricity over a broad temperature range in vacuum is significant to solve the frictional problems of spatial mechanisms. In this study, the vacuum tribological behaviors of nickel-matrix/Ag/(Ca, Ba)F2/graphite(0–2 wt%) composites were studied from 25 to 800 °C. The results show that the synergistic effects of solid lubricants can significantly improve the tribological properties of the composites in vacuum, with the graphite content contributing considerably. For 2 wt% graphite, a low friction coefficient(0.14–0.25) and the lowest wear rate((0.12–4.78)×10-5mm~3·N-1·m-1) were observed in vacuum over the entire testing temperature range. Moreover, the wear mechanisms were clarified via analysis of the chemical composition and morphologies of the sliding surfaces.
引用
收藏
页码:990 / 1001
页数:12
相关论文
共 50 条
  • [1] Investigation of tribological characteristics of nickel alloy-based solid-lubricating composites at elevated temperatures under vacuum
    Zhen, Jinming
    Cheng, Jun
    Tan, Hui
    Sun, Qichun
    Zhu, Shengyu
    Yang, Jun
    Liu, Weimin
    FRICTION, 2021, 9 (05) : 990 - 1001
  • [2] Investigation of tribological characteristics of nickel alloy-based solid-lubricating composites at elevated temperatures under vacuum
    Jinming Zhen
    Jun Cheng
    Hui Tan
    Qichun Sun
    Shengyu Zhu
    Jun Yang
    Weimin Liu
    Friction, 2021, 9 : 990 - 1001
  • [3] Tribological properties of h-BN matrix solid-lubricating composites under elevated temperatures
    Chen, Juanjuan
    Chen, Jiao
    Wang, Shuai
    Sun, Qichun
    Cheng, Jun
    Yu, Yuan
    Yang, Jun
    TRIBOLOGY INTERNATIONAL, 2020, 148 (148)
  • [4] Sliding Tribological Behavior of Al-Fe-V-Si-Graphite Solid-Lubricating Composites at Elevated Temperatures
    Tan, Hui
    Wang, Shuai
    Cheng, Jun
    Zhu, Shengyu
    Yang, Jun
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (01):
  • [5] High-temperature tribological behavior of a nickel alloy matrix solid-lubricating composite under vacuum
    Zhen, Jinming
    Cheng, Jun
    Zhu, Shengyu
    Hao, Junying
    Qiao, Zhuhui
    Yang, Jun
    Liu, Weimin
    TRIBOLOGY INTERNATIONAL, 2017, 110 : 52 - 56
  • [6] Research progress on the tribological properties of epoxy-based solid-lubricating composites
    Song, Luyang
    Jiang, Tao
    Yu, Hua
    Zhou, Yayu
    Cao, Xinna
    Wang, Peng
    Zhang, Bibo
    Yu, Zhuoli
    Pan, Kunming
    Wei, Shizhong
    POLYMER COMPOSITES, 2024, 45 (18) : 16452 - 16466
  • [7] Microstructure, mechanical and vacuum high temperature tribological properties of AlCoCrFeNi high entropy alloy based solid-lubricating composites
    Geng, Yushan
    Tan, Hui
    Cheng, Jun
    Chen, Jiao
    Sun, Qichun
    Zhu, Shengyu
    Yang, Jun
    TRIBOLOGY INTERNATIONAL, 2020, 151
  • [8] Effects of friction layer characteristics on the tribological properties of Ni3Al solid-lubricating composites at different load conditions
    Lu, Guanchen
    Shi, Xiaoliang
    Huang, Yuchun
    Liu, Xiyao
    Yang, Meijun
    MATERIALS RESEARCH EXPRESS, 2018, 5 (05):
  • [9] Tribological behaviors of NiAl based self-lubricating composites containing different solid lubricants at elevated temperatures
    Shi, Xiaoliang
    Zhai, Wenzheng
    Wang, Mang
    Xu, Zengshi
    Yao, Jie
    Song, Siyuan
    Wang, Yufu
    WEAR, 2014, 310 (1-2) : 1 - 11
  • [10] Friction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment
    Cheng, Jun
    Zhen, Jinming
    Zhu, Shengyu
    Yang, Jun
    Ma, Jiqiang
    Li, Wensheng
    Liu, Weimin
    MATERIALS & DESIGN, 2017, 122 : 405 - 413