Microstructure and Mechanical Properties of HVOF Sprayed WC-Co/NiCrBSi, Cr3C2 Coatings on Al Alloys

被引：0
|
作者：
Ozel, Serkan [1 ]
机构：
[1] Bitlis Eren Univ, Fac Engn Architecture, Dept Mech Engn, Bitlis, Turkey
来源：
MATERIALS TESTING | 2013年 / 55卷 / 09期
关键词：
WEAR BEHAVIOR; ABRASIVE WEAR; FATIGUE BEHAVIOR; BOND COAT; PERFORMANCE;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, WC-Co/NiCrBSi and Cr3C2 powders were coated on surface of Al alloys (AA7075-T651, AA5083, AA2024-T4) by using HVOF (High Velocity Oxy Fuel) process. The coated samples were characterized by means of a scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX, XRD), hardness and bonding strength. These results showed that the maximum hardness and minimum surface roughness have been obtained at specimens coated with WC-Co. The bonding strengths of specimens used AA2024-T4 substrates were maximum. XRD study revealed that WC, W2C, C, Co, Cr3Ni2SiC, W5Si3, Cr7C3, Cr3C2, Cr, and Ni phases are present in the coatings.
引用
收藏
页码：694 / 700
页数：7
相关论文
共 50 条
  • [41] Optimization of Surface Properties and Performances for HVOF Sprayed WC-Co Coatings on Mild Steel
    Jean, Ming-Der
    Chien, Tzu-Hsuan
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 324 - +
  • [42] Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings
    Gornik, Monika
    Jonda, Ewa
    Latka, Leszek
    Nowakowska, Monika
    Godzierz, Marcin
    MATERIALS SCIENCE-POLAND, 2021, 39 (04): : 545 - 554
  • [43] High-temperature oxidation of HVOF thermally sprayed NiCr–Cr3C2 coatings: microstructure and kinetics
    Y. Ding
    T. Hussain
    D. G. McCartney
    Journal of Materials Science, 2015, 50 : 6808 - 6821
  • [44] Investigations of microstructure and corrosion resistance of WC-Co and WC-Cr3C2-Ni coatings deposited by HVOF on magnesium alloy substrates
    Jonda, Ewa
    Latka, Leszek
    Godzierz, Marcin
    Maciej, Artur
    SURFACE & COATINGS TECHNOLOGY, 2023, 459
  • [45] Effects of VC additions on the mechanical properties of bimodal WC-Co HVOF thermal sprayed coatings measured by nanoindentation
    Poblano-Salas, C. A.
    Cabral-Miramontes, J. A.
    Gallegos-Melgar, A.
    Ruiz-Luna, H.
    Aguilar-Escobar, J. D.
    Espinosa-Arbelaez, D. G.
    Espinoza-Beltran, F.
    Trapaga-Martinez, G.
    Munoz-Saldana, J.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 167 - 178
  • [46] Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings
    Ramesh, M. R.
    Prakash, S.
    Nath, S. K.
    Sapra, Pawan Kumar
    Venkataraman, B.
    WEAR, 2010, 269 (3-4) : 197 - 205
  • [47] Evaluation of HVOF-sprayed WC-Co coatings for wood machining
    Chivavibul, Pornthep
    Watanabe, Makoto
    Kuroda, Seiji
    Komatsu, M.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (21): : 5127 - 5135
  • [48] Research on tribological properties of WC-Co/NiCrBSi composite coatings prepared by HVOF and APS at elevated temperature
    He, L. (helong19861009@163.com), 1600, China Ordnance Industry Corporation (34):
  • [49] Study on adherence of Cr3C2-NiCr and WC-Co coating at high temperature sprayed by HVOF
    Men, Xiang-Dong
    Tao, Feng-He
    Gan, Lin
    Zhao, Jin-Hui
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2015, 44 (07): : 2005 - 2010
  • [50] Influence of WC/Co Concentration on Structure and Mechanical Properties of the Thermally Sprayed WC/Co-NiCrBSi Coatings
    Gruzdys, Eitvydas
    Meskinis, Sarunas
    Juraitis, Algis
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2009, 15 (01): : 35 - 39
12345