Microstructure and Mechanical Properties of HVOF Sprayed WC-Co/NiCrBSi, Cr3C2 Coatings on Al Alloys

被引：0
|
作者：
Ozel, Serkan [1 ]
机构：
[1] Bitlis Eren Univ, Fac Engn Architecture, Dept Mech Engn, Bitlis, Turkey
来源：
MATERIALS TESTING | 2013年 / 55卷 / 09期
关键词：
WEAR BEHAVIOR; ABRASIVE WEAR; FATIGUE BEHAVIOR; BOND COAT; PERFORMANCE;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, WC-Co/NiCrBSi and Cr3C2 powders were coated on surface of Al alloys (AA7075-T651, AA5083, AA2024-T4) by using HVOF (High Velocity Oxy Fuel) process. The coated samples were characterized by means of a scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX, XRD), hardness and bonding strength. These results showed that the maximum hardness and minimum surface roughness have been obtained at specimens coated with WC-Co. The bonding strengths of specimens used AA2024-T4 substrates were maximum. XRD study revealed that WC, W2C, C, Co, Cr3Ni2SiC, W5Si3, Cr7C3, Cr3C2, Cr, and Ni phases are present in the coatings.
引用
收藏
页码：694 / 700
页数：7
相关论文
共 50 条
  • [21] Influences of flame remelting and WC-Co addition on microstructure, mechanical properties and corrosion behavior of NiCrBSi coatings manufactured via HVOF process
    Shuecamlue, Sirinapa
    Taman, Anuttra
    Khamnantha, Phakkhanan
    Banjongprasert, Chaiyasit
    SURFACES AND INTERFACES, 2024, 48
  • [22] Solidification microstructure of plasma sprayed and remelted carbide coatings (Cr3C2/Ni-Al, W2C-WC/Co)
    Iwaszko, J
    Nitkiewicz, Z
    MATERIALS AND MANUFACTURING PROCESSES, 2002, 17 (02) : 169 - 176
  • [23] Effects of Kerosene Flow Rate on Microstructure and Properties of HVOF Sprayed WC-12Co/NiCrBSi Composite Coatings
    Liu Jie
    Liu Xia
    Hu Kai
    Zhang Shihong
    Wang Shuoyu
    Ding Yi
    Xue Zhaolu
    CHINA SURFACE ENGINEERING, 2020, 33 (03) : 119 - 128
  • [24] Fatigue cracks in HVOF thermally sprayed WC-Co coatings
    Watanabe, S
    Tajiri, T
    Sakoda, N
    Amano, J
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1998, 7 (01) : 93 - 96
  • [25] Mechanical and tribological properties of plasma-sprayed Cr3C2-NiCr, WC-Co, and Cr2O3 coatings
    Li, J
    Zhang, Y
    Huang, J
    Ding, C
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1998, 7 (02) : 242 - 246
  • [26] Mechanical and Tribological Properties of Plasma-Sprayed Cr3C2-NiCr, WC-Co, and Cr2O3 Coatings
    Li J.
    Zhang Y.
    Huang J.
    Ding C.
    Journal of Thermal Spray Technology, 1998, 7 (2) : 242 - 246
  • [27] Pack boronizing of HVOF-sprayed WC-Co coatings
    Niinobe, K
    Watanabe, S
    Itakura, K
    Sakoda, N
    Tajiri, T
    Thermal Spray 2004: Advances in Technology and Application, Proceedings, 2004, : 895 - 897
  • [28] Wear resistance of HVOF sprayed NiSiCrFeB, WC-Co/NiSiCrFeB, WC-Co, and WC-Cr3C2-Ni rice harvesting blades
    Khuengpukheiw, Ronnarit
    Saikaew, Charnnarong
    Wisitsoraat, Anurat
    MATERIALS TESTING, 2021, 63 (01) : 62 - 72
  • [29] Fatigue cracks in HVOF thermally sprayed WC-Co coatings
    Watanabe S.
    Tajiri T.
    Sakoda N.
    Amano J.
    Journal of Thermal Spray Technology, 1998, 7 (1) : 93 - 96
  • [30] Pack boronizing of HVOF-sprayed WC-Co coatings
    ASM Thermal Spray Society, TSS; Deutscher Verband fuer Schweisstechnik, DVS; International Welding Institute, IIW; ASM International (ASM International):
12345