Investigation of IMC layer effect on PBGA solder joint thermal fatigue reliability

被引：0
|
作者：
Che, FX [1 ]
Pang, JHL [1 ]
Xu, LH [1 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
来源：
PROCEEDINGS OF THE 7TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, VOLS. 1 AND 2 | 2005年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Thermal cycling reliability test and analysis for PBGA with Sn-3.8Ag-0.7Cu lead free solder joints with Ni/Au surface finish were investigated. Failure mode of PBGA component exhibits solder fatigue failure with failure site close to solder/IMC interface. The MTTF was determined by Weibull model and used to calibrate the finite element analysis (FEA) results. Intermetallic compound (IMC) layers of CuNiSn are formed when SnAgCu solder is reflowed on PCB board with Ni/Au finish. The reliability of electronic assembly is affected by IMC during thermal cycling. In this paper, finite element analysis of solder joint reliability has been developed to model the effect of IMC layer on solder joint fatigue behavior. It is shown that the IMC layer reduces the solder joint fatigue life. In this study, the elastic modulus for CuNiSn IMC was measured by nanoindentation using a continuous stiffness measurement technique. The IMC elastic modulus effect on solder fatigue was also investigated by FEA modeling.
引用
收藏
页码：427 / 430
页数：4
相关论文
共 50 条
  • [31] Investigation of Package Warpage Effect on TC Solder Joint Reliability
    Wang, Jianhui
    Wen, Long
    Zhou, Jianwei
    Lee, Jaisung
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 1201 - 1205
  • [32] Growth behavior of Sn-Ag3.0-Cu0.5/Cu intermetallic compounds and their effect on the thermal fatigue reliability of PBGA solder joints
    Taiyuan University of Technology, Taiyuan 030024, China
    Xiyou Jinshu Cailiao Yu Gongcheng, 2013, 11 (2315-2320):
  • [33] Thermal and bending fatigue of PBGA assemblies with lead-free solder pastes
    Jonnalagadda, K
    Bai, T
    Olson, B
    2001 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, PROCEEDINGS, 2001, 4587 : 553 - 558
  • [34] Growth Behavior of Sn-Ag3.0-Cu0.5/Cu Intermetallic Compounds and Their Effect on the Thermal Fatigue Reliability of PBGA Solder Joints
    Xiao Gesheng
    Yang Xuexia
    Li Zhigang
    Chen Tong
    Shu Xuefeng
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (11) : 2315 - 2320
  • [35] PBGA solder joint fatigue under temperature cycling, random vibration and combined vibration and thermal cycling loading conditions
    An, Tong
    Chen, Xiaoxuan
    Qin, Fei
    Dai, Yanwei
    Gong, Yanpeng
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (09): : 49 - 54
  • [36] Experimental Study on Thermal Fatigue Life Prediction Model of PBGA Solder Joints
    Shao, Jiang
    2019 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-QINGDAO), 2019,
  • [37] The effect of stencil printing optimization on reliability of CBGA and PBGA solder joints
    Li, Y
    Mahajan, RL
    Subbarayan, G
    JOURNAL OF ELECTRONIC PACKAGING, 1998, 120 (01) : 54 - 60
  • [38] Investigation of the Solder Joint Fatigue Life in Combined Vibration and Thermal Cycling Tests
    Eckert, Tilman
    Krueger, Michael
    Mueller, Wolfgang H.
    Nissen, Nils F.
    Reichl, Herbert
    2010 PROCEEDINGS 60TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2010, : 1209 - 1216
  • [39] Underfill delamination and thermal fatigue reliability of tin-lead solder joint of FCOB
    2000, Chin Acad Sci, Shenyang, China (36):
  • [40] Dispersion and Evaluation of Thermal Fatigue Reliability for Solder Joint by Using Normal Random Numbers
    Maruoka, Toshiaki
    Yu, Qiang
    Shibutani, Tadahiro
    2010 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE, 2010, : 422 - 428
12345