Investigation of IMC layer effect on PBGA solder joint thermal fatigue reliability

被引：0
|
作者：
Che, FX [1 ]
Pang, JHL [1 ]
Xu, LH [1 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
来源：
PROCEEDINGS OF THE 7TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, VOLS. 1 AND 2 | 2005年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Thermal cycling reliability test and analysis for PBGA with Sn-3.8Ag-0.7Cu lead free solder joints with Ni/Au surface finish were investigated. Failure mode of PBGA component exhibits solder fatigue failure with failure site close to solder/IMC interface. The MTTF was determined by Weibull model and used to calibrate the finite element analysis (FEA) results. Intermetallic compound (IMC) layers of CuNiSn are formed when SnAgCu solder is reflowed on PCB board with Ni/Au finish. The reliability of electronic assembly is affected by IMC during thermal cycling. In this paper, finite element analysis of solder joint reliability has been developed to model the effect of IMC layer on solder joint fatigue behavior. It is shown that the IMC layer reduces the solder joint fatigue life. In this study, the elastic modulus for CuNiSn IMC was measured by nanoindentation using a continuous stiffness measurement technique. The IMC elastic modulus effect on solder fatigue was also investigated by FEA modeling.
引用
收藏
页码：427 / 430
页数：4
相关论文
共 50 条
  • [21] Sensitivity of Grain Structure and Fatigue Reliability of Pb-Free Solder Joint on the Position in PBGA Packaging Assembly
    Xu, Huili
    Bang, Woong Ho
    Lee, Tae-Kyu
    Kim, Choong-Un
    2012 IEEE 62ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2012, : 500 - 504
  • [22] Effect of microstructure and IMC on single SnAgCu solder joint by rapid thermal cycles
    Chen, Jibing
    Wan, Nong
    Li, Juying
    He, Zhanwen
    Yin, Yanfang
    Wu, Yiping
    2015 16TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2015,
  • [23] Characterization of warpage of flip-chip PBGA package and its effect on solder joint reliability
    Park, S
    Han, B
    Verma, K
    1999 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, PROCEEDINGS, 1999, 3906 : 253 - 258
  • [24] Effect of electroless Ni/immersion Au plating parameters on PBGA solder joint attachment reliability
    Mei, ZQ
    Johnson, P
    Kaufmann, M
    Eslambolchi, A
    49TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE - 1999 PROCEEDINGS, 1999, : 125 - 134
  • [25] Effect of La on the Cu-Sn intermetallic compound (IMC) growth and solder joint reliability
    Ma, X
    Qian, YY
    Yoshida, F
    JOURNAL OF ALLOYS AND COMPOUNDS, 2002, 334 : 224 - 227
  • [26] Mechanical deflection system (MDS) test and methodology for PBGA solder joint reliability
    Pang, JHL
    Ang, KH
    Shi, XQ
    Wang, ZP
    IEEE TRANSACTIONS ON ADVANCED PACKAGING, 2001, 24 (04): : 507 - 514
  • [27] Thermal Cycling Fatigue Analysis of Copper Pillar-to-Solder Joint Reliability
    Pang, John H. L.
    Wong, Stephen C. K.
    Neo, Sai Kiat
    Tan, Kok Ee
    ESTC 2008: 2ND ELECTRONICS SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2008, : 743 - +
  • [28] Usage of SAM on Fatigue Crack of Solder Joint Induced By Thermal Reliability Test
    Chen, Tung Hung
    Shih, T. I.
    ISTFA 2006, 2006, : 228 - 229
  • [29] Lead free solder joint reliability characterization for PBGA, PQFP and TSSOP assemblies
    Che, FX
    Pang, JHL
    Xiong, BS
    Xu, LH
    Low, TH
    55TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, VOLS 1 AND 2, 2005 PROCEEDINGS, 2005, : 916 - 921
  • [30] Comparison Investigation of Thermal Fatigue and Mechanical Fatigue Behavior of Board Level Solder Joint
    Lin, Jian
    Lei, Yongping
    Wu, Zhongwei
    Yin, LanLi
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 1179 - 1182
12345