Synergistic Effect of Addition of Fillers on Properties of Interior Waterborne UV-Curing Wood Coatings

被引：25
|
作者：
Yan, Xiaoxing [1 ]
Qian, Xingyu [1 ]
Lu, Rong [2 ]
Miyakoshi, Tetsuo [2 ]
机构：
[1] Nanjing Forestry Univ, Coll Furnishings & Ind Design, Nanjing 210037, Jiangsu, Peoples R China
[2] Meiji Univ, Sch Sci & Technol, Dept Ind Chem, Kawasaki, Kanagawa 2148571, Japan
来源：
COATINGS | 2018年 / 8卷 / 01期
关键词：
modification; interior waterborne coating; UV; mechanical properties; gloss; MECHANICAL-PROPERTIES; ADHESION; DURABILITY; MORPHOLOGY; STRENGTH; SILICA; RUBBER; GLOSS;
D O I：
10.3390/coatings8010009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (lambda = 365 nm) and dried at 40 degrees C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum content of 2.0% and CaCO3 content of 1.0%, respectively. When the content of talcum powder was higher than 2%, the mechanical properties and gloss of the WUVCW decreased, and when the talcum powder of WUVCW increase to more than 5%, a matte surface appeared after curing. When CaCO3 and talcum powder were present at the same time, the mechanical properties of WUVCW were better than those of only CaCO3 or talcum powder.
引用
收藏
页数：13
相关论文
共 50 条
  • [21] The effect of amines on the UV-curing of epoxy resins
    Rath, Santosh K.
    Diby, Ambroise
    Seghier, Zoubida
    Boey, Freddy Y. C.
    Abadie, Marc J. M.
    [J]. IRANIAN POLYMER JOURNAL, 2006, 15 (11) : 855 - 862
  • [22] Preparation of nanocoatings in the presence of precipitated CaCO3 fillers by UV-curing
    Izgin, Oner
    Aydin, Meral
    Arsu, Nergis
    [J]. PROGRESS IN ORGANIC COATINGS, 2013, 76 (06) : 950 - 954
  • [23] Relationship between pigment properties and UV-curing efficiency
    Jahn, R
    Jung, TJ
    [J]. PROGRESS IN ORGANIC COATINGS, 2001, 43 (1-3) : 50 - 55
  • [24] UV-curing of fluorinated systems: Synthesis and properties.
    Bongiovanni, R
    Malucelli, G
    Priola, A
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2001, 222 : U329 - U329
  • [25] Spiroorthocarbonate as shrinkage resistance for UV-curing 3D printing: UV-curing kinetics, mechanical properties and volume shrinkage
    Lin, G. H.
    Li, L. J.
    Xiang, H.
    Ye, J.
    Xiang, H. P.
    Li, Z. Q.
    Liu, X. X.
    [J]. EXPRESS POLYMER LETTERS, 2021, 15 (12): : 1174 - 1188
  • [26] Nanocellulosic fillers for waterborne wood coatings: reinforcement effect on free-standing coating films
    Kluge, Marcel
    Veigel, Stefan
    Pinkl, Stefan
    Henniges, Ute
    Zollfrank, Cordt
    Roessler, Albert
    Gindl-Altmutter, Wolfgang
    [J]. WOOD SCIENCE AND TECHNOLOGY, 2017, 51 (03) : 601 - 613
  • [27] Nanocellulosic fillers for waterborne wood coatings: reinforcement effect on free-standing coating films
    Marcel Kluge
    Stefan Veigel
    Stefan Pinkl
    Ute Henniges
    Cordt Zollfrank
    Albert Rössler
    Wolfgang Gindl-Altmutter
    [J]. Wood Science and Technology, 2017, 51 : 601 - 613
  • [28] Thermal and UV-curing behavior of phosphate diacrylate used for flame retardant coatings
    Hu, Xilei Chen Yuan
    Jiao, Chuanmei
    Song, Lei
    [J]. PROGRESS IN ORGANIC COATINGS, 2007, 59 (04) : 318 - 323
  • [29] UV-curing of coatings based on black seed oil modified epoxy resin
    Le Xuan Hien
    Do Minh Thanh
    Nguyen Minh Duc
    [J]. VIETNAM JOURNAL OF CHEMISTRY, 2022, 60 (05) : 615 - 621
  • [30] Synergistic effect of industrial- and bio-fillers waterborne intumescent hybrid coatings on flame retardancy, physical and mechanical properties
    Nasir, Khairunisa Md
    Sulong, Nor Hafizah Ramli
    Johan, Mohd Rafie
    Afifi, Amalina M.
    [J]. PROGRESS IN ORGANIC COATINGS, 2020, 149
12345