Improving the ultimate strength of ship hull

被引：0
|
作者：
Ziha, K. [1 ]
Parunov, J. [1 ]
Corak, M. [1 ]
Tusek, B. [1 ]
机构：
[1] Univ Zagreb, Fac Mech Engn & Naval Architecture, Zagreb, Croatia
来源：
ADVANCED SHIP DESIGN FOR POLLUTION PREVENTION | 2010年
关键词：
D O I：
暂无
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
The paper first briefly introduces the practical methods for ultimate strength analysis of the ship hull girder proposed by Inernational Association of Classification Societies (IACS) Common Structural Rules (CSR). Then it shortly presents the home-made computer programme ULTIS based on the IACS recommendations. Subsequently, benchmark studies of ultimate strength of a bulk carrier built in Croatian shipyard employing program ULTIS and program MARS 2000 are attached. The examples illustrate the stepwise yielding and buckling scenario of hull elements both in deck and bottom structures under sagging and hogging conditions. Finally, the paper investigates the possible improvement of ship's hull girder ultimate strength by strengthening of longitudinal structural elements following their failure sequences under bending.
引用
收藏
页码：95 / 101
页数：7
相关论文
共 50 条
  • [1] Ship hull ultimate strength reliability considering corrosion
    Paik, JK
    Thayamballi, AK
    Kim, SK
    Yang, SH
    [J]. JOURNAL OF SHIP RESEARCH, 1998, 42 (02): : 154 - 165
  • [2] Ultimate strength of ship hull girder with grounding damage
    Tabri, Kristjan
    Naar, Hendrik
    Korgesaar, Mihkel
    [J]. SHIPS AND OFFSHORE STRUCTURES, 2020, 15 (S1) : S161 - S175
  • [3] Ultimate strength of a box girder simulating the hull of a ship
    Akhras, G
    Gibson, S
    Yang, S
    Morchat, R
    [J]. CANADIAN JOURNAL OF CIVIL ENGINEERING, 1998, 25 (05) : 829 - 843
  • [4] Ultimate longitudinal strength reliability assessment of a corroded ship hull
    He, Fu-Zhi
    Wan, Zheng-Quan
    Zhang, Wei
    [J]. Chuan Bo Li Xue/Journal of Ship Mechanics, 2002, 6 (02): : 27 - 45
  • [5] Procedure for calculating hull girder ultimate strength of ship structures
    Haihong Sun
    Xiaozhi Wang
    [J]. Marine Systems & Ocean Technology, 2005, 1 (3) : 137 - 143
  • [6] AN APPROXIMATE CALCULATION APPROACH FOR ULTIMATE STRENGTH OF SHIP HULL GIRDER
    Li, Chenfeng
    Ren, Huilong
    Zhao, Zhongqiu
    Zhao, Xiaodong
    Zeng, Ji
    Xu, Donghao
    [J]. PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 2B, 2013,
  • [7] The Assessment of the Ultimate Hull Girder Strength of RORO Ship after Damages
    Alie, Muhammad Zubair Muis
    Sitepu, Ganding
    Latumahin, Samuel Izaak
    [J]. 4TH INTERNATIONAL SEMINAR ON OCEAN AND COASTAL ENGINEERING, ENVIRONMENTAL AND NATURAL DISASTER MANAGEMENT (ISOCEEN), 2018, 135
  • [8] A new approximate method to evaluate the ultimate strength of ship hull girder
    Tayyar, G. T.
    Bayraktarkatal, E.
    [J]. SUSTAINABLE MARITIME TRANSPORTATION AND EXPLOITATION OF SEA RESOURCES, VOL 1, 2012, : 323 - 329
  • [9] Reliability-based assessment of ship hull girder ultimate strength
    Adiputra, Ristiyanto
    Yoshikawa, Takao
    Erwandi, Erwandi
    [J]. CURVED AND LAYERED STRUCTURES, 2023, 10 (01)
  • [10] Structural reliability of the ultimate hull girder strength of a PANAMAX container ship
    Peschmann, J.
    Schiff, C.
    Wolf, V.
    [J]. ANALYSIS AND DESIGN OF MARINE STRUCTURES, 2009, : 503 - 511
12345