Improving the ultimate strength of ship hull

被引：0
|
作者：
Ziha, K. [1 ]
Parunov, J. [1 ]
Corak, M. [1 ]
Tusek, B. [1 ]
机构：
[1] Univ Zagreb, Fac Mech Engn & Naval Architecture, Zagreb, Croatia
来源：
ADVANCED SHIP DESIGN FOR POLLUTION PREVENTION | 2010年
关键词：
D O I：
暂无
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
The paper first briefly introduces the practical methods for ultimate strength analysis of the ship hull girder proposed by Inernational Association of Classification Societies (IACS) Common Structural Rules (CSR). Then it shortly presents the home-made computer programme ULTIS based on the IACS recommendations. Subsequently, benchmark studies of ultimate strength of a bulk carrier built in Croatian shipyard employing program ULTIS and program MARS 2000 are attached. The examples illustrate the stepwise yielding and buckling scenario of hull elements both in deck and bottom structures under sagging and hogging conditions. Finally, the paper investigates the possible improvement of ship's hull girder ultimate strength by strengthening of longitudinal structural elements following their failure sequences under bending.
引用
收藏
页码：95 / 101
页数：7
相关论文
共 50 条
  • [21] Ultimate Strength Analysis of Ship Hull Girder Under Random Material and Geometric Properties
    Vhanmane, Suhas
    Bhattacharya, Baidurya
    [J]. JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (03):
  • [22] NUMERICAL STUDY ON THE RESIDUAL ULTIMATE STRENGTH OF HULL GIRDER OF A BULK CARRIER AFTER SHIP-SHIP COLLISION
    Yamada, Yasuhira
    [J]. 33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 4A, 2014,
  • [23] ANALYSIS METHOD OF ULTIMATE STRENGTH OF SHIP HULL GIRDER UNDER COMBINED LOADS - APPLICATION TO AN EXISTING CONTAINER SHIP
    Tanaka, Yoshiteru
    Hashizume, Yutaka
    Ogawa, Hiroaki
    Tatsumi, Akira
    Fujikubo, Masahiko
    [J]. PROCEEDINGS OF THE ASME 35TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING , 2016, VOL 9, 2016,
  • [24] Ultimate strength of ship structures
    Gordo, J. M.
    Teixeira, A. P.
    Guedes Soares, C.
    [J]. MARINE TECHNOLOGY AND ENGINEERING, VOL 2, 2011, : 889 - 900
  • [25] Parametric dependencies of the post-ultimate strength behavior of a ship's hull girder in waves
    Xu, Weijun
    Iijima, Kazuhiro
    Fujikubo, Masahiko
    [J]. JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, 2012, 17 (02) : 203 - 215
  • [26] Study on ultimate strength of ship's hull considering cross section and beam finite element
    Alie, Muhammad Zubair Muis
    Juswan
    Wahyuddin
    Rachman, Taufiqur
    [J]. 5TH INTERNATIONAL SEMINAR ON OCEAN AND COASTAL ENGINEERING, ENVIRONMENTAL AND NATURAL DISASTER MANAGEMENT (ISOCEEN 2017), 2018, 177
  • [27] Parametric dependencies of the post-ultimate strength behavior of a ship’s hull girder in waves
    Weijun Xu
    Kazuhiro Iijima
    Masahiko Fujikubo
    [J]. Journal of Marine Science and Technology, 2012, 17 : 203 - 215
  • [28] Numerical research on residual ultimate strength of ship hull plates under uniaxial cyclic loads
    Xia, Tian
    Yang, Ping
    Li, Chuang
    Hu, Kang
    [J]. OCEAN ENGINEERING, 2019, 172 : 385 - 395
  • [29] A methodology for ultimate strength assessment of ship hull girder accounting for enhanced corrosion degradation modelling
    Woloszyk, Krzysztof
    Goerlandt, Floris
    Montewka, Jakub
    [J]. MARINE STRUCTURES, 2024, 93
  • [30] Effect of welding-induced residual stress and distortion on ship hull girder ultimate strength
    Gannon, Liam
    Liu, Yi
    Pegg, Neil
    Smith, Malcolm J.
    [J]. MARINE STRUCTURES, 2012, 28 (01) : 25 - 49
12345