A new isotropic and decoupled 6-DoF parallel manipulator

被引：36
|
作者：
Legnani, G. [1 ]
Fassi, I. [3 ]
Giberti, H. [2 ]
Cinquemani, S. [2 ]
Tosi, D. [1 ]
机构：
[1] Univ Brescia, Dipartimento Ingn Meccan & Ind, I-25129 Brescia, Italy
[2] Politecn Milan, Dipartimento Meccan, I-20156 Milan, Italy
[3] CNR, ITIA, I-20133 Milan, Italy
来源：
MECHANISM AND MACHINE THEORY | 2012年 / 58卷
关键词：
Isotropic manipulator; Decoupled manipulator; PKM; Singularities; Mobility analysis; Redundant constraints; GOUGH-STEWART PLATFORMS; HOMOGENEOUS MATRIX APPROACH; 3D KINEMATICS; DESIGN; MECHANISMS; DYNAMICS; MOTION; JOINTS;
D O I：
10.1016/j.mechmachtheory.2012.07.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper discusses the concepts of isotropy and decoupling in n-DoF (degrees of freedom) manipulators: isotropy means that its kinetostatic properties are identical in all directions, while decoupling means that each DoF of the end effector is controlled by a single actuator. The role of different Jacobian matrices in the isotropy, decoupling and in the general mobility analysis of the manipulators is revised. These concepts are applied to a Gough-Stewart platform showing that it may be isotropic, but not decoupled. A modification of its leg structure is suggested to develop some new 6-DoF PKMs (parallel kinematic machine) decoupled and isotropic in the considered configuration. An introduction to the mobility analysis of serial and parallel manipulators is also presented. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：64 / 81
页数：18
相关论文
共 50 条
  • [31] Novel Design of a 3-RRUU 6-DOF Parallel Manipulator
    Yang, Zhongxing
    Zhang, Dan
    [J]. 4TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2018), 2019, 491
  • [32] Application of 6-DOF parallel manipulator for optoelectronic surveillance systems development
    Stenzel, Tomasz
    Sajkowski, Maciej
    Hetmanczyk, Janusz
    Boratynski, Tomasz
    [J]. 2021 IEEE 19TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (PEMC), 2021, : 677 - 681
  • [33] A new class of isotropic generators for developing 6-DOF isotropic manipulators
    Tsai, K. Y.
    Lee, T. K.
    Jang, Y. S.
    [J]. ROBOTICA, 2008, 26 (05) : 619 - 625
  • [34] Singularity analysis of 6-DOF parallel manipulator with local structurization method
    Kim, D
    Chung, W
    Youm, Y
    [J]. IROS '97 - PROCEEDINGS OF THE 1997 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOT AND SYSTEMS: INNOVATIVE ROBOTICS FOR REAL-WORLD APPLICATIONS, VOLS 1-3, 1996, : 1466 - 1471
  • [35] Stability analysis of trajectory tracing control of 6-DOF parallel manipulator
    Fang, H
    Zhou, B
    Xu, H
    Feng, ZR
    [J]. PROCEEDINGS OF THE 3RD WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-5, 2000, : 1235 - 1239
  • [36] Analysis of a novel 6-DOF, 3-PPSP parallel manipulator
    Byun, YK
    Cho, HS
    [J]. INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 1997, 16 (06): : 859 - 872
  • [37] The optimum design of a 6-DOF parallel manipulator with large orientation workspace
    Hwang, Yoon-Kwon
    Yoon, Jung-Won
    Christiand
    Ryu, Je-Ha
    [J]. PROCEEDINGS OF THE 2007 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-10, 2007, : 163 - 168
  • [38] Kinematic Calibration of a 6-DoF Parallel Manipulator With Random and Less Measurements
    He, Zhiyuan
    Song, Yimin
    Lian, Binbin
    Sun, Tao
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2023, 72
  • [39] Kinematic Calibration of a 6-DoF Parallel Manipulator With Random and Less Measurements
    He, Zhiyuan
    Song, Yimin
    Lian, Binbin
    Sun, Tao
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2023, 72
  • [40] DIMENSIONAL DESIGN THEORY AND METHODOLOGY OF 6-DOF SCISSOR PARALLEL MANIPULATOR
    Tang Xiaoqiang Li TieminWang JinsongDepartment of Precision Instruments
    [J]. Chinese Journal of Mechanical Engineering, 2004, (01) : 6 - 10
12345