A new isotropic and decoupled 6-DoF parallel manipulator

被引：36
|
作者：
Legnani, G. [1 ]
Fassi, I. [3 ]
Giberti, H. [2 ]
Cinquemani, S. [2 ]
Tosi, D. [1 ]
机构：
[1] Univ Brescia, Dipartimento Ingn Meccan & Ind, I-25129 Brescia, Italy
[2] Politecn Milan, Dipartimento Meccan, I-20156 Milan, Italy
[3] CNR, ITIA, I-20133 Milan, Italy
来源：
MECHANISM AND MACHINE THEORY | 2012年 / 58卷
关键词：
Isotropic manipulator; Decoupled manipulator; PKM; Singularities; Mobility analysis; Redundant constraints; GOUGH-STEWART PLATFORMS; HOMOGENEOUS MATRIX APPROACH; 3D KINEMATICS; DESIGN; MECHANISMS; DYNAMICS; MOTION; JOINTS;
D O I：
10.1016/j.mechmachtheory.2012.07.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper discusses the concepts of isotropy and decoupling in n-DoF (degrees of freedom) manipulators: isotropy means that its kinetostatic properties are identical in all directions, while decoupling means that each DoF of the end effector is controlled by a single actuator. The role of different Jacobian matrices in the isotropy, decoupling and in the general mobility analysis of the manipulators is revised. These concepts are applied to a Gough-Stewart platform showing that it may be isotropic, but not decoupled. A modification of its leg structure is suggested to develop some new 6-DoF PKMs (parallel kinematic machine) decoupled and isotropic in the considered configuration. An introduction to the mobility analysis of serial and parallel manipulators is also presented. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：64 / 81
页数：18
相关论文
共 50 条
  • [21] Kinematic Calibration of a 6-DoF Parallel Manipulator With Random and Less Measurements
    He, Zhiyuan
    Song, Yimin
    Lian, Binbin
    Sun, Tao
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2023, 72
  • [22] Design of a Parallel Continuum Manipulator for 6-DOF Fingertip Haptic Display
    Young, Eric M.
    Kuchenbecker, Katherine J.
    [J]. 2017 IEEE WORLD HAPTICS CONFERENCE (WHC), 2017, : 599 - 604
  • [23] Complete dynamic modelling of a moving base 6-dof parallel manipulator
    Lopes, Antonio M.
    [J]. ROBOTICA, 2010, 28 : 781 - 793
  • [24] Adaptive control of 6-DOF parallel manipulator based on cascaded CMAC
    Fang, H.
    Zhou, B.
    Feng, Z.R.
    [J]. Jiqiren/Robot, 2001, 23 (04):
  • [25] The optimum design of a 6-DOF parallel manipulator with large orientation workspace
    Hwang, Yoon-Kwon
    Yoon, Jung-Won
    Ryu, Je-Ha
    Christiand
    [J]. 2006 SICE-ICASE INTERNATIONAL JOINT CONFERENCE, VOLS 1-13, 2006, : 5617 - +
  • [26] The generalized momentum approach to the dynamic modeling of a 6-dof parallel manipulator
    António Mendes Lopes
    Fernando Almeida
    [J]. Multibody System Dynamics, 2009, 21 : 123 - 146
  • [27] ADRC control of a 6-DOF parallel manipulator for telescope secondary mirror
    Ye, Y.
    Yue, Z.
    Gu, B.
    [J]. JOURNAL OF INSTRUMENTATION, 2017, 12
  • [28] Novel Design of a 3-RRUU 6-DOF Parallel Manipulator
    Yang, Zhongxing
    Zhang, Dan
    [J]. IOP Conference Series: Materials Science and Engineering, 2019, 491 (01)
  • [29] A FORWARD AND REVERSE DISPLACEMENT ANALYSIS OF A 6-DOF IN-PARALLEL MANIPULATOR
    ALIZADE, RI
    TAGIYEV, NR
    DUFFY, J
    [J]. MECHANISM AND MACHINE THEORY, 1994, 29 (01) : 115 - 124
  • [30] The generalized momentum approach to the dynamic modeling of a 6-dof parallel manipulator
    Lopes, Antonio Mendes
    Almeida, Fernando
    [J]. MULTIBODY SYSTEM DYNAMICS, 2009, 21 (02) : 123 - 146
12345