A new isotropic and decoupled 6-DoF parallel manipulator

被引：36
|
作者：
Legnani, G. [1 ]
Fassi, I. [3 ]
Giberti, H. [2 ]
Cinquemani, S. [2 ]
Tosi, D. [1 ]
机构：
[1] Univ Brescia, Dipartimento Ingn Meccan & Ind, I-25129 Brescia, Italy
[2] Politecn Milan, Dipartimento Meccan, I-20156 Milan, Italy
[3] CNR, ITIA, I-20133 Milan, Italy
来源：
MECHANISM AND MACHINE THEORY | 2012年 / 58卷
关键词：
Isotropic manipulator; Decoupled manipulator; PKM; Singularities; Mobility analysis; Redundant constraints; GOUGH-STEWART PLATFORMS; HOMOGENEOUS MATRIX APPROACH; 3D KINEMATICS; DESIGN; MECHANISMS; DYNAMICS; MOTION; JOINTS;
D O I：
10.1016/j.mechmachtheory.2012.07.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper discusses the concepts of isotropy and decoupling in n-DoF (degrees of freedom) manipulators: isotropy means that its kinetostatic properties are identical in all directions, while decoupling means that each DoF of the end effector is controlled by a single actuator. The role of different Jacobian matrices in the isotropy, decoupling and in the general mobility analysis of the manipulators is revised. These concepts are applied to a Gough-Stewart platform showing that it may be isotropic, but not decoupled. A modification of its leg structure is suggested to develop some new 6-DoF PKMs (parallel kinematic machine) decoupled and isotropic in the considered configuration. An introduction to the mobility analysis of serial and parallel manipulators is also presented. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：64 / 81
页数：18
相关论文
共 50 条
  • [1] Kinematic design of a 6-DOF parallel manipulator with decoupled translation and rotation
    Jin, Yan
    Chen, I. -Ming
    Yang, Guilin
    [J]. IEEE TRANSACTIONS ON ROBOTICS, 2006, 22 (03) : 545 - 551
  • [2] Adaptive Control of 6-DOF Parallel Manipulator
    Jin Qinglong
    Chen Wenjie
    [J]. 2011 30TH CHINESE CONTROL CONFERENCE (CCC), 2011, : 2440 - 2445
  • [3] A 6-DOF reconfigurable hybrid parallel manipulator
    Coppola, Gianmarc
    Zhang, Dan
    Liu, Kefu
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2014, 30 (02) : 99 - 106
  • [4] Novel 6-DOF parallel manipulator with large workspace
    Glozman, Daniel
    Shoham, Moshe
    [J]. ROBOTICA, 2009, 27 : 891 - 895
  • [5] Output Decoupling control of 6-DOF Parallel manipulator
    He, Jing-Feng
    Xie, Wen-Jian
    Han, Jun-Wei
    [J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2006, 38 (03): : 395 - 398
  • [6] Study on a Novel 6-DOF Combinational Parallel Manipulator
    Zhao, Wei
    Li, Bing
    Yu, Hongjian
    Hu, Ying
    [J]. 2008 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS, VOLS 1-4, 2009, : 1469 - +
  • [7] The Octahedral Hexarot - A novel 6-DOF parallel manipulator
    Isaksson, Mats
    Brogardh, Torgny
    Watson, Matthew
    Nahavandi, Saeid
    Crothers, Phillip
    [J]. MECHANISM AND MACHINE THEORY, 2012, 55 : 91 - 102
  • [8] Modeling and Simulation for a Novel 6-DOF Parallel Manipulator
    Liu, Wei
    Chang, Siqin
    [J]. PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 2, 2009, : 451 - 456
  • [9] The optimum design of 6-DOF isotropic parallel manipulators
    Tsai, KY
    Zhou, SR
    [J]. JOURNAL OF ROBOTIC SYSTEMS, 2005, 22 (06): : 333 - 340
  • [10] Kinematics analysis of a 6-DOF Selectively Actuated Parallel Manipulator
    Jin, Y
    Chen, IM
    Yang, GL
    [J]. 2004 IEEE CONFERENCE ON ROBOTICS, AUTOMATION AND MECHATRONICS, VOLS 1 AND 2, 2004, : 231 - 236
12345