Test vehicle for studying thermal conductivity of die attach adhesives for high temperature electronics

被引：0

作者：

Slater, Conor ^{[1
]}

Vecchio, Fabrizio ^{[1
]}

Maeder, Thomas ^{[1
]}

Ryser, Peter ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, Lab Prod Microtech, CH-1015 Lausanne, Switzerland

来源：

ADVANCED MATERIALS AND STRUCTURES IV | 2012年 / 188卷

关键词：

Die Attach; Thermal Conductivity; High Temperature; Electronics;

D O I：

10.4028/www.scientific.net/SSP.188.238

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Polymer adhesives offer a viable method for mounting silicon dies for high temperature applications. Here a test vehicle for comparing the thermal conductivity of different die attach materials is presented. The setup can be used to determine the degree of degradation of polymers. It consists of a mock die that has an integrated thick film heater, which is mounted onto a substrate. In operation, the substrate is placed on a heatsink and the die is heated. When the temperature reaches equilibrium the heater is switched off and the temperature of the die is measured as it cools. The time constant of the temperature decay is calculated to give the thermal conductivity. In this paper the thermal conductivity of an epoxy die attach adhesive is compared to its shear strength.

引用

页码：238 / 243

页数：6

共 50 条

[1] Interfacial Reaction and Reliability of High Temperature Die Attach Solders for Power Electronics
Bum, Lee Jong
Yuan, Hwang How
Chih, Pan Wei
Daniel, Rhee Min Woo
[J]. 2015 IEEE 17TH ELECTRONICS PACKAGING AND TECHNOLOGY CONFERENCE (EPTC), 2015,
[2] Enhancement of Thermal Conductivity of Die Attach Adhesives (DAAs) using Nanomaterials for High Brightness Light-Emitting Diode (HBLED)
Lu, Dong
Liu, Chenmin
Lang, Xianxin
Wang, Bo
Li, Zhiying
Lee, W. M. Peter
Lee, S. W. Ricky
[J]. 2011 IEEE 61ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2011, : 667 - 672
[3] Effects of Surface Treatments on the Performance of High Thermal Conductive Die Attach Adhesives (DAAs)
Liu, Chenmin
Lu, Dong
Lang, Xianxin
Choi, Ashley
Lee, Peter W. M.
[J]. 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC MATERIALS AND PACKAGING (EMAP 2012), 2012,
[4] High Temperature Endurable Die Attach Material for Power Electronics Package - Process Challenges
Wai, Leong Ching
Ding, Mian Zhi
Tang, Gong Yue
[J]. 2017 IEEE 19TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2017,
[5] Pressure-Assisted Sintering Die-Attach for High-Temperature Electronics
Kaehler, J.
Stranz, A.
Waag, A.
Reiner, E.
[J]. OIL GAS-EUROPEAN MAGAZINE, 2015, 41 (01): : 38 - 39
[6] Thermal cycling analysis of high temperature die-attach materials
Navarro, L. A.
Perpina, X.
Vellvehi, M.
Banu, V.
Jorda, X.
[J]. MICROELECTRONICS RELIABILITY, 2012, 52 (9-10) : 2314 - 2320
[7] MONITORING THERMAL-PROCESSING OF AG GLASS DIE ATTACH ADHESIVES
DELMONT, J
[J]. ADHESIVES AGE, 1995, 38 (02): : 43 - 44
[8] Die Attach Dimension and Material on Thermal Conductivity Study for High Power COB LED
Sarukunaselan, K.
Ong, N. R.
Sauli, Z.
Mahmed, N.
Kirtsaeng, S.
Sakuntasathien, S.
Suppiah, S.
Alcain, J. B.
Retnasamy, V.
[J]. 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
[9] Delamination Study on SOIC L/F with High Thermal Conductivity Die Attach Paste
Pang, Xingshou
Xu, Nathan
Sheila, Chopin
Yao, Jinzhong
[J]. 2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 138 - 141
[10] Die attach by diffusion Sn-Ag-Sn soldering in high temperature electronics applications
Mysliwiec, Marcin
Kisiel, Ryszard
Falat, Tomasz
[J]. 2016 39TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2016, : 140 - 143

← 1 2 3 4 5 →