Atmospheric Pressure Plasma Treatment of Glass Fibre Composite for Adhesion Improvement

被引：34

作者：

Kusano, Yukihiro ^{[1
]}

Mortensen, Henrik ^{[1
]}

Stenum, Bjarne ^{[1
]}

Kingshott, Peter ^{[2
]}

Andersen, Tom L. ^{[3
]}

Brondsted, Povl ^{[3
]}

Bilde-Sorensen, Jorgen B. ^{[3
]}

Sorensen, Bent F. ^{[3
]}

Bindslev, Henrik ^{[1
]}

机构：

[1] Riso Natl Lab, Opt & Plasma Res Dept, DK-4000 Roskilde, Denmark

[2] Riso Natl Lab, Danish Polymer Ctr, DK-4000 Roskilde, Denmark

[3] Riso Natl Lab, Mat Res Dept, DK-4000 Roskilde, Denmark

来源：

PLASMA PROCESSES AND POLYMERS | 2007年 / 4卷

关键词：

adhesion; dielectric barrier discharges (DBD); glass fibre reinforced polyester composite; plasma treatment;

D O I：

10.1002/ppap.200731206

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Glass-fibre-reinforced polyester composite plates were treated with an atmospheric pressure dielectric barrier discharge. Synthetic air was used as the treatment gas. The water contact angle dropped markedly from 84 to 22 degrees after a 2-s treatment, and decreased to 0 degrees when the composite plates were treated for more than 30 s. X-Ray photoelectron spectroscopic analysis showed that the contents of aluminium and oxygen on the surface increased with the plasma treatment. The adhesion strength of the 2-s treated surface was comparable to or higher than that achieved by conventional mechanical surface roughening. It decreased when the surfaces were treated for 5 and 15 s, but recovered for 30-s treatment.

引用

页码：S455 / S459

页数：5

共 50 条

[31] Improvement of mechanical strength of hydrophobic coating on glass surfaces by an atmospheric pressure plasma jet
Hossain, Md. Mokter
Quang Hung Trinh
Sudhakaran, M. S. P.
Sultana, Lamia
Mok, Young Sun
SURFACE & COATINGS TECHNOLOGY, 2019, 357 : 12 - 22
[32] Improvement of the plasma treatment effect on PET with a newly designed atmospheric pressure plasma jet
Onyshchenko, Iuliia
De Geyter, Nathalie
Morent, Rino
PLASMA PROCESSES AND POLYMERS, 2017, 14 (08)
[33] Surface treatment of alumina ceramic for improved adhesion to a glass fibre-reinforced polyester composite
Lausund, K. B.
Johnsen, B. B.
Rahbek, D. B.
Hansen, F. K.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2015, 63 : 34 - 45
[34] Improvement of plasma jet in atmospheric pressure plasma polishing
Zhang, Jufan
Dang, Wei
Li, Bing
Zhu, Xiaorui
International Journal of Manufacturing Research, 2014, 9 (03) : 245 - 257
[35] Improvement of adhesion properties of fluorinated silica glass films by nitrous oxide plasma treatment
Swope, R
Yoo, WS
Hsieh, J
Shuchmann, S
Nagy, F
Nijenhuis, HT
Mordo, D
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (07) : 2559 - 2564
[36] IMPROVEMENT OF SURFACE PROPERTIES OF REINFORCING POLYPROPYLENE FIBRES BY ATMOSPHERIC PRESSURE PLASMA TREATMENT
Fialova, Monika
Skacelova, Dana
Stahel, Pavel
Cernak, Mirko
CHEMICKE LISTY, 2012, 106 : S1439 - S1442
[37] Improvement of Adhesive Behavior of Ballistic Woven Aramid by Atmospheric Pressure Plasma Treatment
Martinez, M-A
Giner, J-M
Encinas, N.
Abenojar, J.
9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES, 2013, : 655 - 664
[38] Reprint of “Improvement of mechanical strength of hydrophobic coating on glass surfaces by an atmospheric pressure plasma jet”
Mokter Hossain M.
Trinh Q.H.
Sudhakaran M.S.P.
Sultana L.
Mok Y.S.
Surface and Coatings Technology, 2021, 376
[39] Hydrophilicity Improvement of Quartz Glass Surface by a Large-Area Atmospheric Pressure Plasma Generator
Zhang, Xiaoman
Jin, Chenggang
Zhuge, Lanjian
Wu, Xuemei
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2020, 48 (03) : 692 - 699
[40] Atmospheric Pressure Plasma Treatment of Magnesium Alloy for Enhanced Coating Adhesion and Corrosion Resistance
Jang, Gyoung Gug
Jun, Jiheon
Yeom, Sinchul
Yoon, Mina
Su, Yi Feng
Wade, John
Stephens, Michael S. S.
Keum, Jong K. K.
COATINGS, 2023, 13 (05)

← 1 2 3 4 5 →