Nano watt power rail-to-rail CMOS amplifier with adaptive biasing circuits for ultralow-power analog LSIs

被引：5

作者：

Ozaki, Toshihiro ^{[1
]}

Hirose, Tetsuya ^{[1
]}

Tsubaki, Keishi ^{[1
]}

Kuroki, Nobutaka ^{[1
]}

Numa, Masahiro ^{[1
]}

机构：

[1] Kobe Univ, Grad Sch Engn, Dept Elect & Elect Engn, Kobe, Hyogo 6578501, Japan

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS | 2015年 / 54卷 / 04期

关键词：

D O I：

10.7567/JJAP.54.04DE13

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

In this paper, we present a rail-to-rail folded-cascode amplifier (AMP) with adaptive biasing circuits (ABCs). The circuit uses a nano ampere current reference circuit to achieve ultralow-power and ABCs to achieve high-speed operation. The ABCs are based on conventional circuits and modified to be suitable for rail-to-rail operation. The measurement results demonstrated that the AMP with the proposed ABCs can operate with an ultralow-power of 384 nA when the input voltage was 0.9V and achieve high speeds of 0.162V/mu s at the rise time and 0.233V/mu s at the fall time when the input pulse frequency and the amplitude were 10 kHz and 1.5V(pp), respectively. (C) 2015 The Japan Society of Applied Physics

引用

页数：6

共 50 条

[31] A low-voltage low-power rail-to-rail constant gm transconductance amplifier
Eltawil, AM
Soliman, AM
[J]. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2000, 24 (02) : 129 - 139
[32] A Low Power Constant-Gm Rail-to-Rail Operational Transconductance Amplifier by Recycling Current
Zhao, Xiao
Fang, Huajun
Xu, Jun
[J]. 2011 INTERNATIONAL CONFERENCE OF ELECTRON DEVICES AND SOLID-STATE CIRCUITS (EDSSC), 2011,
[33] A low-power 900 mV rail-to-rail class-AB operational amplifier
Hu, Y
Sawan, M
[J]. CCECE 2003: CANADIAN CONFERENCE ON ELECTRICAL AND COMPUTER ENGINEERING, VOLS 1-3, PROCEEDINGS: TOWARD A CARING AND HUMANE TECHNOLOGY, 2003, : 171 - 174
[34] A Wideband Three-Stage Rail-to-Rail Power Amplifier Driving Large Capacitive Load
Tam, Wing-Shan
Wong, Oi-Ying
Kok, Chi-Wah
Wong, Hei
Wang, Albert Z. H.
[J]. 2008 IEEE ASIA PACIFIC CONFERENCE ON CIRCUITS AND SYSTEMS (APCCAS 2008), VOLS 1-4, 2008, : 1394 - +
[35] Rail-to-rail low-power high-slew-rate CMOS analogue buffer
Carrillo, JM
Carvajal, RG
Torralba, A
Duque-Carrillo, JE
[J]. ELECTRONICS LETTERS, 2004, 40 (14) : 843 - 844
[36] A low power and low distortion rail-to-rail input/output amplifier using constant current technique
刘彦
赵毅强
张世林
赵宏亮
[J]. Journal of Semiconductors, 2011, 32 (04) : 109 - 112
[37] A low power and low distortion rail-to-rail input/output amplifier using constant current technique
Liu Yan
Zhao Yiqiang
Zhang Shilin
Zhao Hongliang
[J]. JOURNAL OF SEMICONDUCTORS, 2011, 32 (04)
[38] A 1.2V rail-to-rail low-power OpAmp with replica amplifier gain enhancement
Gerfers, F
Hack, C
Manoli, N
[J]. 2002 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL II, PROCEEDINGS, 2002, : 420 - 423
[39] A high-speed low-power rail-to-rail buffer amplifier for LCD driver application
Lu, Chih-Wen
[J]. 2007 SID INTERNATIONAL SYMPOSIUM, DIGEST OF TECHNICAL PAPERS, VOL XXXVIII, BOOKS I AND II, 2007, 38 : 1640 - 1643
[40] Low-Power Bulk-Driven Rail-to-Rail Comparator in 130 nm CMOS Technology
Nagy, Lukas
Arbet, Daniel
Kovac, Martin
Stopjakova, Viera
[J]. 2017 IEEE AFRICON, 2017, : 649 - 652

← 1 2 3 4 5 →