Microstructure and mechanical characteristics of 307Si stainless steel thin-wall parts in wire arc additive manufacturing hybrid interlayer high-speed friction

被引：7
|
作者：
Chen, Chao [1 ]
Feng, Tianting [1 ]
Sun, Guorui [1 ]
Zhang, Huijing [1 ]
机构：
[1] Northeast Forestry Univ, Coll Mech & Elect Engn, Harbin 150040, Peoples R China
来源：
MANUFACTURING LETTERS | 2022年 / 33卷
关键词：
WAAM; Stainless steel; High-speed friction; Microstructure; TENSILE;
D O I：
10.1016/j.mfglet.2022.07.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A method of wire arc additive manufacturing hybrid interlayer high-speed friction (WAAM-HSF) was pro-posed. Microstructure and mechanical characteristics of 307Si stainless steel in the WAAM and WAAM-HSF were investigated. The microstructure in the WAAM and WAAM-HSF consisted of c-austenite and residual d-ferrite. The microstructure in the WAAM-HSF was obviously refined compared with that of WAAM. The grain diameter was gradually reduced from the top region to the bottom region in two thin-walls. In the same region, the grain size in the WAAM was greater than that of WAAM-HSF. Compare to WAAM, the microhardness in the WAAM-HSF was enhanced.(c) 2022 Society of Manufacturing Engineers (SME). Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：42 / 45
页数：4
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of the 316 stainless steel nuclear grade experimental component made by wire and arc additive manufacturing
    Ye, Changqing
    Lu, Guangyao
    Peng, Xiangyang
    Hou, Shuo
    Zhou, Jianming
    Ni, Liang
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (21) : 4258 - 4267
  • [32] 253MA heat-resistant stainless steel by wire arc additive manufacturing: microstructure and mechanical properties
    Guo, Chun
    Zhang, XinYu
    Yao, ZongYu
    Li, WenQing
    Li, Yun
    Chen, YanYan
    Huang, GuangCan
    Lin, QingCheng
    CANADIAN METALLURGICAL QUARTERLY, 2024,
  • [33] Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel
    Wang, Leilei
    Xue, Jiaxiang
    Wang, Qiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 751 : 183 - 190
  • [34] Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts - Interfacial characterization, prospects, and problems
    Dharmendra, C.
    Shakerin, S.
    Ram, G. D. Janaki
    Mohammadi, M.
    MATERIALIA, 2020, 13
  • [35] Microstructure Characteristics and Mechanical Properties of High-Strength Invar Alloy by Wire Arc Additive Manufacturing
    Chen, Cuixin
    Zhao, Chenyu
    Sun, Zhonghua
    He, Jun
    Guo, Weibing
    Xue, Haitao
    Liu, Baoxi
    Zhang, Caidong
    Zhang, Hongxin
    APPLIED SCIENCES-BASEL, 2025, 15 (06):
  • [36] Experimental study of shielding gas concentration on mechanical properties of stainless steel alloy parts using wire and arc additive manufacturing
    Gowthaman, P. S.
    Jeyakumar, S.
    Sarathchandra, D. T.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [37] Oscillating laser-arc hybrid additive manufacturing of aluminum alloy thin-wall based on synchronous wire-powder feeding
    Meng, Yunfei
    Yu, Qianxi
    Wu, Xu
    Guo, Xiaohan
    Yang, Ziheng
    Xu, Lidong
    Chen, Hui
    THIN-WALLED STRUCTURES, 2025, 206
  • [38] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF WIRE ARC ADDITIVE-MANUFACTURING HIGH-CARBON CHROMIUM BEARING STEEL
    Zhang, Wenjie
    Lei, Weining
    Zhang, Yang
    Liu, Xiao
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (03): : 359 - 364
  • [39] Wire and Arc Additive Manufacturing of High-Strength Low-Alloy Steel: Microstructure and Mechanical Properties
    Duarte, Valdemar R.
    Rodrigues, Tiago A.
    Schell, Norbert
    Santos, Telmo G.
    Oliveira, Joao P.
    Miranda, Rosa M.
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (11)
  • [40] Microstructural evolution in a thin wall of 2Cr13 martensitic stainless steel during wire arc additive manufacturing
    Lyu, Zhiwei
    Sato, Yutaka S.
    Tokita, Shun
    Zhao, Yue
    Jia, Jinlong
    Wu, Aiping
    MATERIALS CHARACTERIZATION, 2021, 182 (182)
12345