Experimental Investigation on Autoclaved Aerated Concrete Using Palladium-Platinum Tailings

被引：0

作者：

Zhang, Ye ^{[1
]}

Duan, Peng Xuan ^{[1
]}

Jia, Bao Sheng ^{[1
]}

Zhang, Fan ^{[1
]}

机构：

[1] Beijing Bldg Mat Acad Sci Res, Natl Key Lab Solid Waste Resource Utilizat & Ener, Beijing 100041, Peoples R China

来源：

ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3 | 2012年 / 217-219卷

关键词：

Palladium-platinum tailing; autoclaved aerated concrete; low-silicon;

D O I：

10.4028/www.scientific.net/AMM.217-219.1195

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the low-silicon palladium-platinum tailing is used to produce autoclaved aerated concrete. The influences of water binder ratio, palladium-platinum tailing content, lime content and conditioning agents on the compressive strength of the autoclaved aerated concrete are investigated. Optimal raw material formulation and procedure are determined for the autoclaved aerated concrete. The compressive strength and frost resistance of autoclaved aerated concrete made by the optimal raw material formulation and procedure meet with the requirements of autoclaved aerated concretes of B06 grade, and its thermal conductivity, drying shrinkage reach the requirements of the relevant national standards of China.

引用

页码：1195 / 1199

页数：5

共 50 条

[41] APPLICATION OF AUTOMATIC IMAGE-ANALYSIS FOR THE INVESTIGATION OF AUTOCLAVED AERATED CONCRETE STRUCTURE
PETROV, I
SCHLEGEL, E
CEMENT AND CONCRETE RESEARCH, 1994, 24 (05) : 830 - 840
[42] Experimental investigations on the behaviour of autoclaved aerated concrete under fatigue and sustained loads
Raue, E
Tartsch, E
8TH INTERNATIONAL CONFERENCE ON MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2004, : 145 - 150
[43] Shear experimental study on the bonded interface properties between autoclaved aerated concrete and ordinary concrete
Sun J.
Zhang J.
Wang K.
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017, 49 (08): : 141 - 145
[44] Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products
Ma, Bao-guo
Cai, Li-xiong
Li, Xiang-guo
Jian, Shou-wei
JOURNAL OF CLEANER PRODUCTION, 2016, 127 : 162 - 171
[45] Pore characteristics and mechanical behaviors of autoclaved aerated concrete produced from coal bottom ash and tailings
Zhang, Mingyuan
Yao, Huayan
Liu, Yuting
Gan, Jiarui
Tang, Lingxiao
ENGINEERING REPORTS, 2024, 6 (03)
[46] EXPERIMENTAL STUDY OF AUTOCLAVED AERATED CONCRETE USING CIRCULATING FLUIDIZED-BED COMBUSTION FLY ASH
Sebestova, Pavlina
Cerny, Vit
Drochytka, Rostislav
MATERIALI IN TEHNOLOGIJE, 2020, 54 (02): : 157 - 161
[47] Simultaneous removal of nitrogen and phosphorus using autoclaved aerated concrete particles in biological aerated filters
Chen, Dong
Yu, Chao
Bao, Teng
Zhu, Chengzhu
Qing, Chengsong
Chen, Tianhu
DESALINATION AND WATER TREATMENT, 2016, 57 (41) : 19402 - 19410
[48] Autoclaved aerated concrete: experimental evaluation of its thermal properties at high temperatures
Campanale, Manuela
Moro, Lorenzo
HIGH TEMPERATURES-HIGH PRESSURES, 2015, 44 (05) : 369 - 382
[49] Simulation and Experimental Substantiation of the Thermal Properties of Non-Autoclaved Aerated Concrete with Recycled Concrete Powder
Ma, Xiaosong
Li, Hao
Wang, Dezhi
Li, Chunbao
Wei, Yongqi
MATERIALS, 2022, 15 (23)
[50] Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: Effect of content and fineness
Cai, Lixiong
Ma, Baoguo
Li, Xiangguo
Lv, Yang
Liu, Zhuolin
Jian, Shouwei
CONSTRUCTION AND BUILDING MATERIALS, 2016, 128 : 361 - 372

← 1 2 3 4 5 →