Corrosion behaviour of Al-Si/SiC composite in sea water

被引：0
|
作者：
Gnecco, F [1 ]
Beccaria, AM [1 ]
机构：
[1] CNR, MITER, Ist Corros Marina Met, I-16149 Genoa, Italy
来源：
BRITISH CORROSION JOURNAL | 1999年 / 34卷 / 01期
关键词：
D O I：
10.1179/bcj.1999.34.1.57
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A study was made of the corrosion behaviour in sea water of a metal matrix composite (MMC) of Al-si alloy reinforced with SiC particles. Free corrosion and electrochemical tests were carried out at 25 degrees C in quiescent sea water at pH 8.2 containing 6.5 ppm dissolved oxygen. The microstructure if as examined by metallographic microscopy and by X-my microdiffractometry; electrochemical properties (pitting resistance, polarisation resistance) were investigated by potentiodynamic polarisation and electrochemical impedance spectroscopy; pitting formation was observed by optical microscopy; and the corrosion layer was characterised by X-ray photoelectron spectroscopy. In sea water the MMC suffered localised corrosion of the metallic matrix where Al-Cu intermetallic compounds ale present. Pit formation was enhanced by copper enrichment in the surface layer. The MMC showed a small passivity domain which increased slowly,with immersion time. No domain of perfect passivity was present. The SiC particles acted as cathodic sites with respect to the metallic matrix, which experienced selective aluminium dissolution.
引用
收藏
页码：57 / 62
页数：6
相关论文
共 50 条
  • [31] Thermal expansion and dimensional stability of Al-Si matrix composite reinforced with high content SiC
    Zhang, Q
    Wu, GH
    Jiang, LT
    Chen, GQ
    MATERIALS CHEMISTRY AND PHYSICS, 2003, 82 (03) : 780 - 785
  • [32] Effect of ion implantation on the dry sliding wear behavior of SiC reinforced Al-Si composite
    Li, XY
    Tandon, KN
    SURFACE & COATINGS TECHNOLOGY, 1997, 90 (1-2): : 136 - 142
  • [33] Corrosion behaviour of 2124/SiC composite material
    López-Caballero, JA
    Martín, E
    Baile, MT
    Forn, A
    Bastidas, JM
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2005, 44 (06): : 393 - 398
  • [34] Erosion-corrosion behavior of SiC particle-reinforced Al-Si alloy in NaOH slurry
    Y. L. Saraswathi
    S. Das
    D. P. Mondal
    Metallurgical and Materials Transactions A, 2005, 36 : 2259 - 2262
  • [35] Erosion-corrosion behavior of SiC particle-reinforced Al-Si alloy in NaOH slurry
    Saraswathi, YL
    Das, S
    Mondal, DP
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (08): : 2259 - 2262
  • [36] Effect of Heat Treatment on Mechanical Behaviour of Fly ash Reinforced Al-Si Composite - A Review
    Shukla, Anurag
    Soni, Sanjay
    Rana, R. S.
    Singh, Alok
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6426 - 6432
  • [37] Effect of Si content and microstructure on the wear behaviour of Al-Si alloys
    Uguz, A
    Bayram, A
    METALL, 2001, 55 (12): : 758 - 761
  • [38] Al-Si/B4C composite coatings on Al-Si substrate by plasma spray technique
    Sarikaya, Ozkan
    Anik, Selahaddin
    Aslanlar, Salim
    Okumus, S. Cem
    Celik, Erdal
    MATERIALS & DESIGN, 2007, 28 (09) : 2443 - 2449
  • [39] Detectability of Holes in SiC Particulate-Reinforced Al-Si Alloy Composite by Means of Ultrasonic Measurement
    Kato, Hiroshi
    Otsuka, Shota
    Kurita, Haruo
    MATERIALS TRANSACTIONS, 2012, 53 (02) : 417 - 424
  • [40] Study of subgrain Al layer of SiC/Al interface in SiCp/Al-Si composites
    Sui, Xiandong
    Luo, Chengping
    Ouyang, Liuzhang
    Luo, Zhuoxuan
    Cailiao Gongcheng/Journal of Materials Engineering, 2000, (03): : 8 - 10
12345