Strain Hardening of ZK60 Magnesium Alloys

被引：0

作者：

Cho, Jae-Hyung ^{[1
]}

Kang, Suk-Bong ^{[1
]}

Han, Sang-Ho ^{[1
]}

机构：

[1] Korea Inst Mat Sci, Chang Won 641831, Gyeongnam, South Korea

来源：

MAGNESIUM TECHNOLOGY 2012 | 2012年

关键词：

ZK60; magnesium alloys; compression; texture and microstructure; EBSD; MG-ZN; UNIAXIAL COMPRESSION; TEXTURE DEVELOPMENT; ZIRCONIUM ALLOYS; DEFORMATION; MICROSTRUCTURE; POLYCRYSTALS; DIFFRACTION; SIMULATION; SLIP;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

ZK60(Mg-Zn-Zr) alloys possessed precipitate hardening behavior during aging, and the frequency and size of rod and disc shaped precipitates changed with aging. Strain hardening and texturing of ZK60 alloys were investigated during uniaxial warm compression. Uniaxial warm compression tests were carried out at various deformation rates and temperatures. Heat treatments of solid solution (T4) and aging (T6) affected flow stress behaviors. Aging heat treatment samples (T6) had higher yield stresses and lower strain hardening rates than solution heat-treated samples (T4). Both hardening by deformation and softening by dynamic recrystallization (DRX) at elevated temperatures were observed. Most of precipitates formed during aging contained Zn and Zr elements. Linear strain hardening behavior was examined using a visco-plastic self consistent (VPSC) model.

引用

页码：361 / 364

页数：4

共 50 条

[31] Dynamic Compression Behavior of ZK60 Magnesium Alloy under Different Strain Rate
Zhu Shuiwen
Zhang wei
Chen Guoping
Peng wei
PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING AND TRANSPORTATION 2015, 2016, 30 : 1643 - 1646
[32] Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation
Yang, Yang
Wang, Zhen
Jiang, Lihong
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 705 : 566 - 571
[33] The Effect of Ultragrain Refinement on the Strength and Strain Rate Sensitivity of a ZK60 Magnesium Alloy
Carvalho, Amanda P.
Figueiredo, Roberto B.
ADVANCED ENGINEERING MATERIALS, 2022, 24 (03)
[34] Corrosion Protection of ZK60 Wrought Magnesium Alloys by Micro-Arc Oxidation
Xue, Yuna
Pang, Xin
Karparvarfard, Seyyed Mohamad Hasan
Jahed, Hamid
Luo, Sheji
Shen, Yi
METALS, 2022, 12 (03)
[35] Microstructure Characterization of ZK60 Magnesium Alloys Using TEM and HR-EBSD
Cho, Jae-Hyung
Kim, Soo-Hyun
Han, Sang-Ho
Kang, Suk-Bong
MICROSCOPY AND MICROANALYSIS, 2013, 19 : 8 - 12
[36] Three-dimensional processing maps and flow instability of magnesium alloys ZK60
National Die and Mold CAD Engineering Research Center, Shanghai Jiaotong University, Shanghai 200030, China
Zhongguo Youse Jinshu Xuebao, 2008, 6 (1020-1026):
[37] Multiaxial fatigue of extruded ZK60 magnesium alloy
Albinmousa, Jafar
Adinoyi, Muhammed J.
Merah, Nesar
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2019, 42 (10) : 2276 - 2289
[38] Dislocation configurations in an extruded ZK60 magnesium alloy
Li, B.
Ma, E.
Ramesh, K. T.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (11): : 2607 - 2614
[39] Extraordinary superplastic ductility of magnesium alloy ZK60
Lapovok, R
Cottam, R
Thomson, P
Estrin, Y
JOURNAL OF MATERIALS RESEARCH, 2005, 20 (06) : 1375 - 1378
[40] Superplasticity and diffusion bonding of magnesium alloy ZK60
Yu, YD
Jiang, HY
Li, Q
Zai, CQ
Ding, WJ
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (06) : 1253 - 1257

← 1 2 3 4 5 →