Strain Hardening of ZK60 Magnesium Alloys

被引:0
|
作者
Cho, Jae-Hyung [1 ]
Kang, Suk-Bong [1 ]
Han, Sang-Ho [1 ]
机构
[1] Korea Inst Mat Sci, Chang Won 641831, Gyeongnam, South Korea
来源
关键词
ZK60; magnesium alloys; compression; texture and microstructure; EBSD; MG-ZN; UNIAXIAL COMPRESSION; TEXTURE DEVELOPMENT; ZIRCONIUM ALLOYS; DEFORMATION; MICROSTRUCTURE; POLYCRYSTALS; DIFFRACTION; SIMULATION; SLIP;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
ZK60(Mg-Zn-Zr) alloys possessed precipitate hardening behavior during aging, and the frequency and size of rod and disc shaped precipitates changed with aging. Strain hardening and texturing of ZK60 alloys were investigated during uniaxial warm compression. Uniaxial warm compression tests were carried out at various deformation rates and temperatures. Heat treatments of solid solution (T4) and aging (T6) affected flow stress behaviors. Aging heat treatment samples (T6) had higher yield stresses and lower strain hardening rates than solution heat-treated samples (T4). Both hardening by deformation and softening by dynamic recrystallization (DRX) at elevated temperatures were observed. Most of precipitates formed during aging contained Zn and Zr elements. Linear strain hardening behavior was examined using a visco-plastic self consistent (VPSC) model.
引用
收藏
页码:361 / 364
页数:4
相关论文
共 50 条
  • [21] Effect of the Strain Rate on the Damping and Mechanical Properties of a ZK60 Magnesium Alloy
    Feng, Xuhui
    Sun, Youping
    Lu, Yuwei
    He, Jiangmei
    Liu, Xiao
    Wan, Siyu
    MATERIALS, 2020, 13 (13) : 1 - 10
  • [22] Effect of hot compression and annealing on microstructure evolution of ZK60 magnesium alloys
    Shouren Wang
    Suk Bong Kang
    JaeHyung Cho
    Journal of Materials Science, 2009, 44 : 5475 - 5484
  • [23] Glycerol as a leveler on ZK60 magnesium alloys during plasma electrolytic oxidation
    Qiu, Zhaozhong
    Zhang, Yushen
    Li, Yuemei
    Sun, Jinchao
    Wang, Rui
    Wu, Xiaohong
    RSC ADVANCES, 2015, 5 (78): : 63738 - 63744
  • [24] Observation of high-strain-rate superplasticity in ZK60 and SiCp/ZK60 composite
    Watanabe, H
    Mukai, T
    Nieh, TG
    Higashi, K
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 297 - 302
  • [25] Effect of sintering temperature on microstructures and mechanical properties of ZK60 magnesium alloys
    Ma, Luosheng
    Ma, Lili
    Jin, Peipeng
    Feng, Xinya
    Jia, Lei
    MATERIALS RESEARCH EXPRESS, 2022, 9 (01)
  • [26] Hot workability of magnesium alloy ZK60
    Mwembela, A
    McQueen, HJ
    HOT WORKABILITY OF STEELS & LIGHT ALLOYS-COMPOSITES, 1996, : 181 - 188
  • [27] Homogeneity of microstructure and mechanical properties of ZK60 magnesium alloys fabricated by high strain rate triaxial-forging
    Wu, Y.-Z. (yzwu666@gmail.com), 1600, Central South University of Technology (24):
  • [28] Effect of a compound modification process on the microstructure and mechanical properties of ZK60 magnesium alloys
    Xu, Yuyou
    Liang, Yilong
    Peng, Guigui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 778
  • [29] Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation
    Yang, Yang (yangyanggroup@163.com), 1600, Elsevier Ltd (705):
  • [30] Flow behavior and microstructure of ZK60 magnesium alloy compressed at high strain rate
    Wu, Yuan-zhi
    Yan, Hong-ge
    Zhu, Su-qin
    Chen, Ji-hua
    Liu, An-min
    Liu, Xian-lan
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (04) : 930 - 938