Strontium bismuth tantalate thin film deposition by liquid-delivery MOCVD using novel liquid bismuth precursors

被引：1
|
作者：
Silinskas, M.
Lisker, M.
Matichyn, S.
Burte, E. P.
Hempel, T.
Hyeon, J.
Lorenz, V.
Edelmannn, F.
机构：
[1] Univ Magdeburg, Inst Micro & Sensor Syst, D-39106 Magdeburg, Germany
[2] Univ Magdeburg, Inst Expt Phys, D-39106 Magdeburg, Germany
[3] Univ Magdeburg, Chem Inst, D-39106 Magdeburg, Germany
来源：
INTEGRATED FERROELECTRICS | 2006年 / 79卷
关键词：
D O I：
10.1080/10584580600659555
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Novel liquid bismuth precursors (triallylbismuth (Bi(CH2CHCH=2) and tributylbismuth (Bi(C4H9)(3))) were tested for metalorganic chemical vapor deposition (MOCVD). Strontiumbis-pentaethoxy methoxyethoxy tantalate (Sr[Ta(OEt)(5)(OC2H4OMe)](2)) was used as Sr-Ta source. The growth rates were <= 10 nm/h for triallylbismuth and for triphenylbismuth, <= 1000 nm/h for tributylbismuth, and <= 60 nm/h for Sr[Ta(OEt)(5)(OC2H4OMe)](2) . The deposition rate of SBT was always lower than the rate of bismuth oxide. A decrease of the deposition pressure improved uniformity of the film thickness but reduced the deposition rate of the films. XPS depth profiling indicated more metallic bond characteristics of Ti, Sr, and Bi after ion bombardment.
引用
收藏
页码：195 / 202
页数：8
相关论文
共 50 条
  • [31] Liquid-delivery metal-organic CVD of strontium bismuth tantalate thin films using Sr[Ta(OC2H5)5(OC2H4OCH3)]2 and Bi(C6H5)3 precursors
    Shin, WC
    Choi, KJ
    Seong, NJ
    Choi, ES
    Kim, BH
    Yoon, SG
    ADVANCED MATERIALS, 2002, 14 (17) : A221 - +
  • [32] Preparation of YBCO thin film by MOCVD method using new liquid metal organic precursors
    Tasaki, Y
    Yoshizawa, S
    Koyama, K
    Fujino, Y
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1999, 9 (02) : 2367 - 2370
  • [33] Silver Films Deposited by Liquid-Delivery MOCVD using (Tertbutylcarboxylate)(Triethylphosphine)Silver with Toluene as the Solvent
    Lisca, M.
    Kalkofen, B.
    Lisker, M.
    Burte, E. P.
    Szymanska, I. B.
    Szlyk, E.
    EUROCVD 17 / CVD 17, 2009, 25 (08): : 1039 - 1046
  • [34] Ruthenium films deposited by liquid-delivery MOCVD using bis(ethylcyclopentadienyl)ruthenium with toluene as the solvent
    Hur'yeva, Tetyana
    Lisker, Marco
    Burte, Edmund P.
    CHEMICAL VAPOR DEPOSITION, 2006, 12 (07) : 429 - 434
  • [35] Manufacturing of perovskite thin films using liquid delivery MOCVD
    VanBuskirk, PC
    Roeder, JF
    Bilodeau, S
    INTEGRATED FERROELECTRICS, 1995, 10 (1-4) : 9 - 22
  • [36] Characterization of LiCoO2 thin film cathodes deposited by liquid-delivery metallorganic chemical vapor deposition for rechargeable lithium batteries
    Cho, SI
    Yoon, SG
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (12) : A1584 - A1588
  • [37] Deposition of bismuth chalcogenide thin films using novel single-source precursors by metal-organic chemical vapor deposition
    Waters, J
    Crouch, D
    Raftery, J
    O'Brien, P
    CHEMISTRY OF MATERIALS, 2004, 16 (17) : 3289 - 3298
  • [38] Deposition control of La in the preparation of (Bi,La)4Ti3O12 films by liquid-delivery MOCVD
    Sekita, Yoshihiro
    Tasaki, Yuzo
    Tanaka, Tsutornu
    Yoshizawa, Shuji
    Transactions of the Materials Research Society of Japan, Vol 31, No 1, 2006, 31 (01): : 177 - 179
  • [39] Preparation of SrBi2Ta2O9 thin films by liquid-delivery MOCVD without additional solvents
    Nukaga, N
    Ono, H
    Shida, T
    Machida, H
    Suzuki, T
    Funakubo, H
    INTEGRATED FERROELECTRICS, 2002, 45 : 215 - 222
  • [40] Photocatalytic water oxidation at bismuth vanadate thin film electrodes grown by direct liquid injection chemical vapor deposition method
    Archana, Panikar Sathyaseelan
    Shan, Zhichao
    Pan, Shanlin
    Gupta, Arunava
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (12) : 8475 - 8485
12345