An amperometric solid state NO sensor using a LaGaO3 electrolyte for monitoring exhaust gas

被引：8
|
作者：
Dutta, Atanu [1 ]
Ishihara, Tatsumi [1 ]
机构：
[1] Kyushu Univ, Fac Engn, Dept Appl Chem, Nishi Ku, Fukuoka 8190395, Japan
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2006年 / 21卷 / 03期
关键词：
amperometric sensor; current response; exhaust gas monitoring; high temperature sensor; LaGaO3; LSM electrode; mixed potential; Ni doping to LaGaO3; NO oxidation electrode; NO sensor; oxygen reduction electrode; pollution; selectivity; sensitivity; solid electrolyte;
D O I：
10.1080/10426910500464404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A LaGaO3-based electrochemical sensor in the amperometric mode was demonstrated as highly sensitive to NO in the temperature range 500-700 degrees C. Sensor performance was found dependent on the Ni doping of LaGaO3. Using optimized electrode materials, highest sensitivity was achieved as high as 2409 mu A/decade (at 550 degrees C) when Ni doping to electrolyte was 7 mol%. The selectivity of the sensor was found very high to NO with respect to the typical coexisting gases in the exhaust environment. The sensing principle was observed to follow the mixed potential behavior.
引用
收藏
页码：225 / 228
页数：4
相关论文
共 50 条
  • [31] Ba(La)CoO3 cathode for intermediate temperature operating solid oxide fuel cell using LaGaO3 based electrolyte
    Ishihara, T
    Fukui, S
    Nishiguchi, H
    Takita, Y
    SOLID OXIDE FUEL CELLS VII (SOFC VII), 2001, 2001 (16): : 439 - 448
  • [32] La-doped BaCoO3 as a cathode for intermediate temperature solid oxide fuel cells using a LaGaO3 base electrolyte
    Ishihara, T
    Fukui, S
    Nishiguchi, H
    Takita, Y
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (07) : A823 - A828
  • [33] High oxide ion conductivity in Fe and Mg doped LaGaO3 as the electrolyte of solid oxide fuel cells
    Enoki, Makiko
    Yan, Jingwang
    Matsumoto, Hiroshige
    Ishihara, Tatsumi
    SOLID STATE IONICS, 2006, 177 (19-25) : 2053 - 2057
  • [34] Ni-Fe bimetallic anode for intermediate temperature solid oxide fuel cells using LaGaO3 based oxide electrolyte
    Ishihara, Tatsumi
    Shinagawa, Masashi
    Kawakami, Akira
    Matsumoto, Hiroshige
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 1350 - +
  • [35] Structural and electrical behavior of Ba-doped LaGaO3 composite electrolyte
    Singh, Kapil Sood K.
    Pandey, O. P.
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2014, 6 (06)
  • [36] Microstructure-property relationships of perovskite electrodes on doped LaGaO3 electrolyte
    Wang, WT
    Hellstrom, EE
    PROCEEDINGS OF THE SIXTH INTERNATIONAL SYMPOSIUM ON ELECTRODE PROCESSES, 1996, 96 (08): : 446 - 455
  • [37] Intermediate temperature solid oxide fuel cells using LaGaO3 based perovskite oxide
    Ishihara, T
    SOLID STATE IONICS: THE SCIENCE AND TECHNOLOGY OF IONS IN MOTION, 2004, : 47 - 58
  • [38] Amperometric hydrocarbon sensor using difference in electrode catalysis for monitoring exhaust gas from internal combustion engines
    Ishihara, T
    Kabemura, K
    Fukuyama, M
    Dutta, A
    Nishiguchi, H
    Takita, Y
    ELECTROCHEMISTRY, 2003, 71 (06) : 420 - 422
  • [39] High Power SOFC using LaGaO3 Based Oxide Electrolyte Film Prepared on Porous Metal Substrate
    Ishihara, T.
    Yan, J. W.
    Matsumoto, H.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 435 - +
  • [40] Effects of fuel velocity in anode channel on power generation property of tubular solid oxide fuel cells using LaGaO3 electrolyte film
    Watanabe, Naoki
    Inoishi, Atsushi
    Ooe, Toshiharu
    Kawakami, Akira
    Shigefuji, Hiroshi
    Ishihara, Tatsumi
    ELECTROCHIMICA ACTA, 2013, 97 : 86 - 91
12345