Microelectromechanical Systems (MEMS) Resistive Heaters as Circuit Protection Devices

被引:5
|
作者
Coutu, Ronald A., Jr. [1 ]
Ostrow, Scott A. [2 ]
机构
[1] Air Force Inst Technol, Dept Elect Engn, Wright Patterson AFB, OH 45433 USA
[2] US Air Force, Air Force Inst Technol, Wright Patterson AFB, OH 45433 USA
关键词
Circuit protection; microelectromechanical systems (MEMS); resistive heaters; reverse engineering;
D O I
10.1109/TCPMT.2013.2282362
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
With increased opportunities for the exploitation (i.e., reverse engineering) of vulnerable electronic components and systems, circuit protection has become a critical issue. Circuit protection techniques are generally software-based and include cryptography (encryption/decryption), obfuscation of codes, and software guards. Examples of hardware-based circuit protection include protective coatings on integrated circuits, trusted foundries, and macro-sized components that self-destruct, thus destroying critical components. This paper is the first to investigate the use of microelectromechanical systems (MEMS) to provide hardware-based protection of critical electronic components to prevent reverse engineering or other exploitation attempts. Specifically, surface-micromachined polycrystalline silicon to be used as meandering resistive heaters were designed analytically and fabricated using a commercially available MEMS prototyping service (i.e., PolyMUMPs), and integrated with representative components potentially at risk for exploitation, in this case pseudomorphic high-electron mobility transistors (pHEMTs). The MEMS heaters were initiated to self-destruct, destroying a critical circuit component and thwart a reverse engineering attempt. Tests revealed reliable self-destruction of the MEMS heaters with approximately 25 V applied, resulting in either complete operational failure or severely altering the pHEMT device physics. The prevalent failure mechanism was metallurgical, in that the material on the surface of the device was changed, and the specific failure mode was the creation of a short-circuit. Another failure mode was degraded device operation due to permanently altered device physics related to either dopant diffusion or ohmic contact degradation. The results, in terms of the failure of a targeted electronic component, demonstrate the utility of using MEMS devices to protect critical components which are otherwise vulnerable to exploitation.
引用
收藏
页码:2174 / 2179
页数:6
相关论文
共 50 条