Corrosion and electrochemical evaluation of an Al-Si-Cu aluminum alloy in ethanol solutions

被引:39
|
作者
Song, Guang-Ling [1 ]
Liu, Minghong [2 ]
机构
[1] GM Global Res & Dev, Chem Sci & Mat Syst Lab, Warren, MI 48090 USA
[2] Meda Engn & Tech Serv, Southfield, MI 48075 USA
关键词
Al alloy; Ethanol fuel; Corrosion; SN-BI ALLOYS; IMPEDANCE SPECTROSCOPY; BEHAVIOR; FUEL; PROTECTION;
D O I
10.1016/j.corsci.2013.03.009
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The corrosion of aluminum alloy AlSi8Cu3Fe(Zn) in ethanol and ethanol solutions containing 10 vol.% water and 10 vol.% acetic acid, respectively, was investigated by means of electrochemical impedance spectroscopy (EIS), polarization curve, immersion, optical microscopy, scanning electron microscopy and element mapping. The Al alloy in the ethanol and its solutions exhibited a capacitive loop in the measured Nyquist EIS spectra at high frequencies, which can be attributed to the ethanol's dielectric response. Addition of 10 vol.% acetic acid increased the ethanol corrosivity more significantly than the same amount of water addition. The Al-Si-Cu-Mg precipitated zones in the alloy were susceptible to corrosion attack due to the micro-galvanic effect by the Cu-containing precipitates. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:73 / 81
页数:9
相关论文
共 50 条
  • [41] Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy
    Liu, Tao
    Pei, Zongrui
    Barton, Dallin
    Thompson, Gregory B.
    Brewer, Luke N.
    ACTA MATERIALIA, 2022, 224
  • [42] Interfacial Heat Transfer during Die Casting of an Al-Si-Cu Alloy
    A. Hamasaiid
    G. Wang
    C. Davidson
    G. Dour
    M.S. Dargusch
    Metallurgical and Materials Transactions A, 2009, 40 : 3056 - 3058
  • [43] Microstructure and microhardness evolution of melt-spun Al-Si-Cu alloy
    Emad M. Ahmed
    M. R. Ebrahim
    The European Physical Journal Plus, 129
  • [44] Metallographic study of a cast Al-Si-Cu alloy by means of a novel etchant
    Rodriguez, Andres
    Torres, Ruben
    Talamantes-Silva, Jose
    Velasco, Eulogio
    Valtierra, Salvador
    Colas, Rafael
    MATERIALS CHARACTERIZATION, 2012, 68 : 110 - 116
  • [45] Effect of Cooling Rate on the Precipitation Characteristics of Cast Al-Si-Cu Alloy
    Okayasu, M.
    Sahara, N.
    Touda, M.
    ARCHIVES OF FOUNDRY ENGINEERING, 2021, 21 (04) : 55 - 60
  • [46] Microstructure and microhardness evolution of melt-spun Al-Si-Cu alloy
    Ahmed, Emad M.
    Ebrahim, M. R.
    EUROPEAN PHYSICAL JOURNAL PLUS, 2014, 129 (04): : 1 - 8
  • [47] Wear characteristics of thixoformed hypoeutectic Al-Si-Cu alloy with Mg addition
    Alhawari, K. S.
    Omar, M. Z.
    Ghazali, M. J.
    Salleh, M. S.
    Mohammed, M. N.
    PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 94 - 95
  • [48] Fabrication of Composite of Al-Si-Cu Alloy Foam Core Surrounded by Pure Aluminum Foam and Its Compression Properties
    Takao Utsunomiya
    Yoshihiko Hangai
    Kenji Amagai
    Sinji Hashimura
    Journal of Materials Engineering and Performance, 2023, 32 : 10582 - 10590
  • [49] Fabrication of Composite of Al-Si-Cu Alloy Foam Core Surrounded by Pure Aluminum Foam and Its Compression Properties
    Utsunomiya, Takao
    Hangai, Yoshihiko
    Amagai, Kenji
    Hashimura, Sinji
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (23) : 10582 - 10590
  • [50] Metal Corrosion of Al-Si-Cu Pattern Wafer Due to Chloride Ion Contaminants
    Wu, Bi-Jun
    Bai, Hsunling
    Lin, I-Kai
    Liu, Hsiang-Hsing
    AEROSOL AND AIR QUALITY RESEARCH, 2012, 12 (01) : 104 - 112