Tribological Behavior of Ti2AlNb Alloy by Surface plasmas Carburized

被引：0
|
作者：
Zhu, Dan Yang [1 ]
Liang, Wen Ping [1 ]
Miao, Qiang [1 ]
Guo, Kai [1 ]
Li, Long [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 210016, Peoples R China
来源：
ADVANCED COMPOSITE MATERIALS, PTS 1-3 | 2012年 / 482-484卷
关键词：
Ti2AlNb orthorhombic alloy; double glow plasma surface carburizing; Micro hardness; wear resistance; ORTHORHOMBIC PHASE;
D O I：
10.4028/www.scientific.net/AMR.482-484.914
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In order to improve the wear resistance of Ti2AlNb orthorhombic alloy, the carburized coating has been successfully prepared on Ti2AlNb alloy by double glow plasma technology. The microstructure, chemical composition and phase structure of the carburized coating were analyzed by means of SEM, EDS and XRD. The Micro hardness of the alloy layer was measured, and the bond strength of carburized coating with substrate was also evaluated by scratch test. The tribological behaviors of layer were investigated by friction-wear test. The results show that a carburized layer is formed which is about 40 mu m and the content of C gradient decrease after double glow plasma carburizing, the Micro hardness of the layer is 1051 HV0.1 and the bond of the coating is 62N, the tribological behavior of layer is much better than matrix.
引用
收藏
页码：914 / 918
页数：5
相关论文
共 50 条
  • [41] Enhanced infrared emissivity of MAO coatings formed on Ti2AlNb alloy
    Wang, Y. H.
    Ouyang, J. H.
    Liu, Z. G.
    Wang, Y. M.
    Zhou, Y.
    SURFACE ENGINEERING, 2014, 30 (07) : 460 - 466
  • [42] Effect of Mo Addition on Microstructures and Mechanical Properties of Ti2AlNb Alloy
    Chen, Yuyong
    Du, Zhaoxin
    Kong, Fantao
    Xiao, Shulong
    Zhang, Zhenxing
    ADVANCED DESIGN TECHNOLOGY, PTS 1-3, 2011, 308-310 : 142 - 145
  • [43] Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy
    Jinhu Zhang
    Jinmin Liu
    Dongsheng Xu
    Jie Wu
    Lei Xu
    Rui Yang
    JournalofMaterialsScience&Technology, 2019, 35 (11) : 2513 - 2525
  • [44] Study on dynamic chip formation mechanisms of Ti2AlNb intermetallic alloy
    He, Linjiang
    Su, Honghua
    Xu, Jiuhua
    Zhang, Liang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 4415 - 4428
  • [45] Microstructure and property of Ti2AlNb alloy by selective electron beam melting
    Che Q.
    He W.
    Li H.
    Cheng K.
    Wang Y.
    Cailiao Gongcheng/Journal of Materials Engineering, 2022, 50 (07): : 156 - 164
  • [46] Microstructure and mechanical properties of nanostructured intermetallic alloy based on Ti2AlNb
    Shagiev, M. R.
    Salishchev, G. A.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 153 - 158
  • [47] The mechanical behaviour of the intermetallic Ti2AlNb
    Nandy, TK
    Banerjee, D
    STRUCTURAL INTERMETALLICS 1997, 1996, : 777 - 786
  • [48] The Effect of Yttrium Addition on the Oxidation Resistance of Ti2AlNb Based Alloy
    陈玉勇
    Journal of Wuhan University of Technology(Materials Science), 2009, (S1) : 5 - 8
  • [49] Enhancement of tensile properties of Ti2AlNb alloy added with Ta element
    Zhou, Xuan
    Fu, Li
    Ge, Hualong
    Mao, Yong
    MATERIALS LETTERS, 2022, 329
  • [50] Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy
    Zhang, Jinhu
    Liu, Jinmin
    Xu, Dongsheng
    Wu, Jie
    Xu, Lei
    Yang, Rui
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (11) : 2513 - 2525
12345