Tribological Behavior of Ti2AlNb Alloy by Surface plasmas Carburized

被引：0
|
作者：
Zhu, Dan Yang [1 ]
Liang, Wen Ping [1 ]
Miao, Qiang [1 ]
Guo, Kai [1 ]
Li, Long [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 210016, Peoples R China
来源：
ADVANCED COMPOSITE MATERIALS, PTS 1-3 | 2012年 / 482-484卷
关键词：
Ti2AlNb orthorhombic alloy; double glow plasma surface carburizing; Micro hardness; wear resistance; ORTHORHOMBIC PHASE;
D O I：
10.4028/www.scientific.net/AMR.482-484.914
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In order to improve the wear resistance of Ti2AlNb orthorhombic alloy, the carburized coating has been successfully prepared on Ti2AlNb alloy by double glow plasma technology. The microstructure, chemical composition and phase structure of the carburized coating were analyzed by means of SEM, EDS and XRD. The Micro hardness of the alloy layer was measured, and the bond strength of carburized coating with substrate was also evaluated by scratch test. The tribological behaviors of layer were investigated by friction-wear test. The results show that a carburized layer is formed which is about 40 mu m and the content of C gradient decrease after double glow plasma carburizing, the Micro hardness of the layer is 1051 HV0.1 and the bond of the coating is 62N, the tribological behavior of layer is much better than matrix.
引用
收藏
页码：914 / 918
页数：5
相关论文
共 50 条
  • [21] Thermal processing of an orthorhombic (Ti2AlNb) based alloy
    Sarosi, PM
    Partridge, A
    Shelton, EFJ
    Jones, IP
    STRUCTURAL INTERMETALLICS 2001, 2001, : 175 - 180
  • [22] Oxidation Behavior of Three Different Zones of Linear Friction Welded Ti2AlNb Alloy
    Chen, Xi
    Xie, Faqin
    Ma, Tiejun
    Li, Wenya
    Wu, Xiangqing
    ADVANCED ENGINEERING MATERIALS, 2016, 18 (11) : 1944 - 1951
  • [23] Preparation and high temperature tribological properties of microarc oxidation ceramic coatings formed on Ti2AlNb alloy
    Ouyang, Jia-Hu
    Wang, Yuan-Hong
    Liu, Zhan-Guo
    Wang, Ya-Ming
    Wang, Yu-Jin
    WEAR, 2015, 330 : 239 - 249
  • [24] Double glow plasma surface molybdenizing of Ti2AlNb
    Liang, Wen-ping
    Xu, Zhong
    Miao, Qiang
    Liu, Xiao-ping
    He, Zhi-yong
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11): : 5068 - 5071
  • [25] Reheat cracking in Ti2AlNb alloy resistance spot weldments
    Cai, Detao
    Chen, Jichun
    Mao, Xianfeng
    Hao, Chuanyong
    INTERMETALLICS, 2013, 38 : 63 - 69
  • [26] Preparation and mechanical properties influencing of Ti2AlNb powder alloy
    Wu, Jie
    Wu, Xiaofei
    Kai, Tian
    Yin, Yifeng
    Cui, Xiaoxiao
    Lu, Zhengguan
    Xu, Lei
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2025, 53 (01): : 175 - 185
  • [27] THE ORDERING STATE OF Ti2AlNb
    Jones, I. P.
    Sarosi, P. M.
    Hriljac, J. A.
    ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2002, 58 : C235 - C235
  • [28] Orthorhombic precipitate variant selection in a Ti2AlNb based alloy
    Zheng, Youping
    Zeng, Weidong
    Li, Dong
    Xu, Jianwei
    Ma, Xiong
    Liang, Xiaobo
    Zhang, Jianwei
    MATERIALS & DESIGN, 2018, 158 : 46 - 61
  • [29] Diffusion bonding of Ti2AlNb alloy using pure Ti foil as an interlayer
    Wang, Y.
    Cai, X. Q.
    Yang, Z. W.
    Wang, D. P.
    Liu, X. G.
    Liu, Y. C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 756 : 163 - 174
  • [30] Diffusion bonding of Ti2AlNb alloy using pure Ti foil as an interlayer
    Yang, Z.W. (tjuyangzhenwen@163.com), 1600, Elsevier Ltd (756):
12345