The study of mechanical properties of poly(lactic) acid PLA-based 3D printed filament under temperature and environmental conditions

Recently, Industrial Revolution 4.0 has highlighted the key components that will shift the world into dig-italization; cybersecurity, cloud computing, mobile technologies, machine to machine, advanced robotics, big data, Internet of Things (IoT), RFID technology, cognitive computing and additive manufacturing. Additive manufacturing or better known as 3D printing technology has captivated many researchers due to its many advantages. This study aims to focus on the influence of temperature on the physical properties of the 3D printed structure made from poly(lactic) acid (PLA) with 100% infill. The highest Young's modulus at the value of 4.42 GPa was obtained with a slight deviation under other samples exposed at the temperature of 70 degrees C and 80 degrees C. It was found that the ultimate tensile strength of the 3D printed structure when being exposed at the temperature of 80 degrees C for a maximized duration of 10 days while the breakage/fracture limit was recorded on samples after the 13rd day exposure at the same tem-perature. Meanwhile, the highest strain was achieved at 8.04% also during the 13rd day but at 70 degrees C. In conclusion, post-heat treatment has minimal effect on the Young's modulus of 3D printed PLA but it was largely effecting the fracture limit of the structure. Therefore, heat treatment at temperature closed to the glass transition temperature of PLA polymer improved the adhesion strength between the printed layer thus enhancing the durability of the specimen under load conditions. (c) 2022 Elsevier Ltd. All rights reserved.Selection and peer-review under responsibility of the scientific committee of the International Confer-ence on "Recent Advances in Functional Materials".