THE INFLUENCE OF PROCESSING PARAMETERS ON THE MECHANICAL PROPERTIES OF PLA 3D PRINTED PARTS

被引：0
|
作者：
Axinte, M. [1 ]
Chicet, D.L. [1 ]
Chelariu, R. [1 ]
Comăneci, R.I. [1 ]
机构：
[1] Gheorghe Asachi Technical University of Iasi, Faculty of Materials Science and Engineering, BLVD. Mangeron, No. 41, Iasi,700050, Romania
来源：
Archives of Metallurgy and Materials | 2024年 / 69卷 / 04期
关键词：
In this paper; the effect of two process parameters on the mechanical properties of tensile specimens made by FDM was studied. A commercially available PLA filament (produced by Prusa) was used as raw material; from which several sets of specimens were produced; the varied parameters being the raster angle (RA) relative to the longitudinal axis of the specimen and the overflow (OF). Thus; three printing angles were chosen; 0°; 22.5°; and; 45°; each set of specimens being made with an OF of 95%; 100% and 105% respectively. The printed layer was chosen with a standard thickness of 0.2 mm. For the analysis of the mechanical properties; the specimen sets were subjected to tensile testing on an Instron 3382 machine and the results obtained were interpreted comparatively. Additionally; the fracture surfaces of the specimens were analysed by stereomicroscope. Two-way repeated measures ANOVA analysis of experimental data indicated that both parameters and their interaction significantly influence the specimen weight but; in the case of mechanical properties (modulus of elasticity; yield strength; tensile strength; yield elongation and tensile elongation) were insignificantly influenced by both process parameters. In this context regardless of raster angle; an overflow of 95% provides the same mechanical properties as an overflow of 105%; but at a minimum weight sample. © 2024. The Author(s);
D O I：
10.24425/amm.2024.151433
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1621 / 1627
相关论文
共 50 条
  • [1] Effect of Printing Parameters of 3D Printed PLA Parts on Mechanical Properties
    Jayakumar, N.
    Senthilkumar, G.
    Pradeep, A. D.
    [J]. JOURNAL OF ENGINEERING RESEARCH, 2021, 9
  • [2] Evaluation of Printing Parameters on Porosity and Mechanical Properties of 3D Printed PLA/PBAT Blend Parts
    Cardoso, Paulo Henrique Machado
    Coutinho, Rafaella Rabello Teixeira Perdone
    Drummond, Flavia Rocha
    da Conceicao, Marceli do Nascimento
    Thire, Rossana Mara da Silva Moreira
    [J]. MACROMOLECULAR SYMPOSIA, 2020, 394 (01)
  • [3] Size Effects on the Mechanical Properties of 3D Printed Plaster and PLA Parts
    Wu, Chao
    Chen, Chen
    Cheeseman, Chris
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (07)
  • [4] Influence processing parameters of FDM 3D printer on the mechanical properties of ABS Parts
    Shafaat, Amir
    Ashtiani, Hamidreza Rezaei
    [J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2021, 28 (03) : 250 - 257
  • [5] Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models
    Afonso, Joao Araujo
    Alves, Jorge Lino
    Caldas, Gabriela
    Gouveia, Barbara Perry
    Santana, Leonardo
    Belinha, Jorge
    [J]. RAPID PROTOTYPING JOURNAL, 2021, 27 (03) : 487 - 495
  • [6] STUDY OF THE INFLUENCE OF 3D PRINTING PARAMETERS ON THE MECHANICAL PROPERTIES OF PLA
    Fernandes, Joao
    Deus, Augusto M.
    Reis, Luis
    Vaz, Maria Fatima
    Leite, Marco
    [J]. PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 547 - 552
  • [7] Effect of processing parameters on mechanical properties of 3D printed samples
    Maloch J.
    Hnátková E.
    Žaludek M.
    Krátký P.
    [J]. Materials Science Forum, 2018, 919 : 230 - 235
  • [8] The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts
    Ivorra-Martinez, Juan
    Peydro, Miguel Angel
    Gomez-Caturla, Jaume
    Sanchez-Nacher, Lourdes
    Boronat, Teodomiro
    Balart, Rafael
    [J]. VIRTUAL AND PHYSICAL PROTOTYPING, 2023, 18 (01)
  • [9] Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts
    Ambati, Shivani Sriya
    Ambatipudi, Ravindra
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 804 - 807
  • [10] Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts
    Ambati, Shivani Sriya
    Ambatipudi, Ravindra
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 804 - 807
12345