Mechanical and Thermal Properties of Multilayer-Coated 3D-Printed Carbon Fiber Reinforced Nylon Composites

被引:5
|
作者
Chen, Hongwei [1 ]
Wang, Kaibao [1 ]
Chen, Yao [1 ]
Le, Huirong [1 ]
机构
[1] Tsinghua Univ, Future Lab, Beijing 100084, Peoples R China
来源
JOURNAL OF COMPOSITES SCIENCE | 2023年 / 7卷 / 07期
关键词
carbon fiber reinforced nylon composite; 3D printing; multilayer coating; copper mesh; numerical model;
D O I
10.3390/jcs7070297
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper evaluates the mechanical and thermal properties of 3D-printed short carbon fiber reinforced composites (sCFRPs). A numerical analysis was developed to predict the mechanical and thermal properties of the sCFRPs, which were verified via experimental tests. In the experiments, a novel technique was adopted by coating the sCFRPs with carbon fiber fabric and copper mesh to further improve its mechanical and thermal performance. Various copper meshes (60-mesh, 100-mesh and 150-mesh) were integrated with carbon fiber fabric to form a multilayer structure, which was then coated on the surface of Nylon 12-CF composite material (base material) to form a composite plate. The effects of the copper mesh on the mechanical and thermal properties of the composite plate were studied theoretically and experimentally. The results show that the addition of different copper meshes had a significant influence on the mechanical and thermal properties of the composite plate, which contained carbon fiber fabric, copper mesh and the base material. Among them, the mechanical and thermal properties of the composite plate with the 60-mesh copper mesh were significantly improved, while the improvement effect slowly declined with the increase in the thickness of the base material. The composite plate with 100-mesh and 150-mesh copper meshes had improved mechanical properties, whereas the influence on its thermal conductivity was limited. For thermal conductivity calculation, both the thickness and length directions of the heat transfer were considered. The comparative analysis indicated that the calculated values and experimental results are in excellent agreement, meaning that this numerical model is a useful tool for guiding the design of surface lamination for 3D-printed sCFRPs.
引用
收藏
页数:13
相关论文
共 50 条
  • [1] Performance enhancement of 3D-printed carbon fiber-reinforced nylon 6 composites
    Chen, Siyu
    Cai, Longfei
    Duan, Yingzhu
    Jing, Xishuang
    Zhang, Chengyang
    Xie, Fubao
    [J]. POLYMER COMPOSITES, 2024, 45 (06) : 5754 - 5772
  • [2] The effect of filling density on flammability and mechanical properties of 3D-printed carbon fiber-reinforced nylon
    Zarybnicka, Lucie
    Machotova, Jana
    Pagac, Marek
    Rychly, Jozef
    Vykydalova, Anna
    [J]. POLYMER TESTING, 2023, 120
  • [3] Tensile Performance of 3D-Printed Continuous Fiber-Reinforced Nylon Composites
    Mohammadizadeh, Mahdi
    Fidan, Ismail
    [J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2021, 5 (03):
  • [4] Mechanical Properties of 3D-Printed Carbon Fiber-Reinforced Cement Mortar
    Li, Yeou-Fong
    Tsai, Pei-Jen
    Syu, Jin-Yuan
    Lok, Man-Hoi
    Chen, Huei-Shiung
    [J]. FIBERS, 2023, 11 (12)
  • [5] Mechanical, Thermal, and Electrical Properties on 3D Printed Short Carbon Fiber Reinforced Polypropylene Composites
    Zhan, Xiugan
    Su, Ke
    Tuo, Xiaohang
    Gong, Yumei
    [J]. ACS APPLIED POLYMER MATERIALS, 2024, 6 (07) : 3787 - 3795
  • [6] Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs
    Brett G. Compton
    Jackson K. Wilt
    James W. Kemp
    Nadim S. Hmeidat
    Samantha R. Maness
    Mark Edmond
    Steve Wilcenski
    Jason Taylor
    [J]. MRS Communications, 2021, 11 : 100 - 105
  • [7] Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs
    Compton, Brett G.
    Wilt, Jackson K.
    Kemp, James W.
    Hmeidat, Nadim S.
    Maness, Samantha R.
    Edmond, Mark
    Wilcenski, Steve
    Taylor, Jason
    [J]. MRS COMMUNICATIONS, 2021, 11 (02) : 100 - 105
  • [8] Effects of gamma irradiation on mechanical properties of 3D-printed carbon fiber–reinforced ABS
    Robert McTaggart
    Behzad Rankouhi
    Todd Letcher
    [J]. The International Journal of Advanced Manufacturing Technology, 2020, 111 : 1917 - 1927
  • [9] 3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review
    Sanei, Seyed Hamid Reza
    Popescu, Diana
    [J]. JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (03):
  • [10] Electromechanical Properties of 3D-Printed Stretchable Carbon Fiber Composites
    Salo, Teemu
    Di Vito, Donato
    Halme, Aki
    Vanhala, Jukka
    [J]. MICROMACHINES, 2022, 13 (10)