Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs

被引：0
|
作者：
Brett G. Compton
Jackson K. Wilt
James W. Kemp
Nadim S. Hmeidat
Samantha R. Maness
Mark Edmond
Steve Wilcenski
Jason Taylor
机构：
[1] University of Tennessee,Mechanical, Aerospace, and Biomedical Engineering Department
[2] University of Tennessee,Materials Science and Engineering Department
[3] BNNano,undefined
来源：
MRS Communications | 2021年 / 11卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this work, new boron nitride-reinforced epoxy-based composite inks for direct-ink write (DIW) additive manufacturing are presented. Printed composites are characterized for thermal conductivity, flexure, and impact energy, along with optical and electron microscopy. The new inks utilize boron nitride nanobarbs (BNNBs), a novel form of boron nitride nanotube, where the surface is decorated with hexagonal boron nitride nanoplatelets. BNNBs are shown to improve the thermal conductivity of the printed composites up to 32%, the strength up to 34%, and stiffness up to 44%. Anisotropy was observed in all measurements, suggesting that the BNNBs become aligned during printing.
引用
收藏
页码：100 / 105
页数：5
相关论文
共 50 条
  • [1] Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs
    Compton, Brett G.
    Wilt, Jackson K.
    Kemp, James W.
    Hmeidat, Nadim S.
    Maness, Samantha R.
    Edmond, Mark
    Wilcenski, Steve
    Taylor, Jason
    [J]. MRS COMMUNICATIONS, 2021, 11 (02) : 100 - 105
  • [2] Thermal and mechanical properties of 3D printed boron nitride - ABS composites
    Quill, Tyler J.
    Smith, Matthew K.
    Zhou, Tony
    Baioumy, Mohamed Gamal Shafik
    Berenguer, Joao Paulo
    Cola, Baratunde A.
    Kalaitzidou, Kyriaki
    Bougher, Thomas L.
    [J]. APPLIED COMPOSITE MATERIALS, 2018, 25 (05) : 1205 - 1217
  • [3] Thermal and mechanical properties of 3D printed boron nitride – ABS composites
    Tyler J. Quill
    Matthew K. Smith
    Tony Zhou
    Mohamed Gamal Shafik Baioumy
    Joao Paulo Berenguer
    Baratunde A. Cola
    Kyriaki Kalaitzidou
    Thomas L. Bougher
    [J]. Applied Composite Materials, 2018, 25 : 1205 - 1217
  • [4] Thermal, electrical, and mechanical properties of hexagonal boron nitride-reinforced epoxy composites
    Zhou, Wenying
    Zuo, Jing
    Zhang, Xiaoqian
    Zhou, Anning
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (20) : 2517 - 2526
  • [5] Improvement of the Thermal Conductivity and Mechanical Properties of 3D-Printed Polyurethane Composites by Incorporating Hydroxylated Boron Nitride Functional Fillers
    Su, Kai-Han
    Su, Cherng-Yuh
    Shih, Wei-Ling
    Lee, Fang-Ting
    [J]. MATERIALS, 2023, 16 (01)
  • [6] Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy
    Brett G. Compton
    Nadim S. Hmeidat
    Robert C. Pack
    Maximilian F. Heres
    Joshua R. Sangoro
    [J]. JOM, 2018, 70 : 292 - 297
  • [7] Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy
    Compton, Brett G.
    Hmeidat, Nadim S.
    Pack, Robert C.
    Heres, Maximilian F.
    Sangoro, Joshua R.
    [J]. JOM, 2018, 70 (03) : 292 - 297
  • [8] Mechanical and Thermal Properties of Multilayer-Coated 3D-Printed Carbon Fiber Reinforced Nylon Composites
    Chen, Hongwei
    Wang, Kaibao
    Chen, Yao
    Le, Huirong
    [J]. JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (07):
  • [9] 3D-printed surface-modified aluminum nitride reinforced thermally conductive composites with enhanced thermal conductivity and mechanical strength
    Lee, Seonmin
    Park, Dabin
    Kim, Jooheon
    [J]. POLYMERS FOR ADVANCED TECHNOLOGIES, 2022, 33 (04) : 1291 - 1297
  • [10] Manufacturing of stereolithographic 3D printed boron nitride nanotube-reinforced ceramic composites with improved thermal and mechanical performance
    Tank, Mehul
    De Leon, Ana
    Huang, Winton
    Patadia, Mitesh
    Degraff, Joshua
    Sweat, Rebekah
    [J]. FUNCTIONAL COMPOSITES AND STRUCTURES, 2023, 5 (01):
12345