Mechanical and Thermal Properties of Multilayer-Coated 3D-Printed Carbon Fiber Reinforced Nylon Composites

被引:5
|
作者
Chen, Hongwei [1 ]
Wang, Kaibao [1 ]
Chen, Yao [1 ]
Le, Huirong [1 ]
机构
[1] Tsinghua Univ, Future Lab, Beijing 100084, Peoples R China
来源
JOURNAL OF COMPOSITES SCIENCE | 2023年 / 7卷 / 07期
关键词
carbon fiber reinforced nylon composite; 3D printing; multilayer coating; copper mesh; numerical model;
D O I
10.3390/jcs7070297
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper evaluates the mechanical and thermal properties of 3D-printed short carbon fiber reinforced composites (sCFRPs). A numerical analysis was developed to predict the mechanical and thermal properties of the sCFRPs, which were verified via experimental tests. In the experiments, a novel technique was adopted by coating the sCFRPs with carbon fiber fabric and copper mesh to further improve its mechanical and thermal performance. Various copper meshes (60-mesh, 100-mesh and 150-mesh) were integrated with carbon fiber fabric to form a multilayer structure, which was then coated on the surface of Nylon 12-CF composite material (base material) to form a composite plate. The effects of the copper mesh on the mechanical and thermal properties of the composite plate were studied theoretically and experimentally. The results show that the addition of different copper meshes had a significant influence on the mechanical and thermal properties of the composite plate, which contained carbon fiber fabric, copper mesh and the base material. Among them, the mechanical and thermal properties of the composite plate with the 60-mesh copper mesh were significantly improved, while the improvement effect slowly declined with the increase in the thickness of the base material. The composite plate with 100-mesh and 150-mesh copper meshes had improved mechanical properties, whereas the influence on its thermal conductivity was limited. For thermal conductivity calculation, both the thickness and length directions of the heat transfer were considered. The comparative analysis indicated that the calculated values and experimental results are in excellent agreement, meaning that this numerical model is a useful tool for guiding the design of surface lamination for 3D-printed sCFRPs.
引用
收藏
页数:13
相关论文
共 50 条
  • [21] Mechanical, thermal, and microstructural analysis of 3D printed short carbon fiber-reinforced nylon composites across diverse infill patterns
    Dubey, Dushyant
    Singh, Satinder Paul
    Behera, Bijoya Kumar
    [J]. PROGRESS IN ADDITIVE MANUFACTURING, 2024,
  • [22] Delamination analysis of 3D-printed nylon reinforced with continuous carbon fibers
    Polyzos, E.
    Katalagarianakis, A.
    Van Hemelrijck, D.
    Pyl, L.
    [J]. ADDITIVE MANUFACTURING, 2021, 46
  • [23] Mechanical properties of lightweight 3D-printed structures made with carbon-filled nylon
    Spina, Roberto
    Morfini, Luigi
    Galantucci, Luigi M.
    [J]. PROGRESS IN ADDITIVE MANUFACTURING, 2024,
  • [24] High stiffness 3D-printed continuous pitch carbon fiber reinforced polymer composites
    Saleh, Menna A.
    Olcun, Sinan
    Karam, Mohamed
    Kempers, Roger
    Melenka, Garrett W.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2024, 58 (16) : 1873 - 1886
  • [25] Mechanism based failure of 3D-printed continuous carbon fiber reinforced thermoplastic composites
    Dutra, Thiago Assis
    Ferreira, Rafael Thiago Luiz
    Resende, Hugo Borelli
    Blinzler, Brina Jane
    Asp, Leif E.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2021, 213
  • [26] Thermal and Mechanical Characterization of 3D Printed Continuous Fiber Reinforced Composites
    Abbott, Andrew C.
    Furmanski, Jevan
    Tandon, G. P.
    Koerner, Hilmar
    Butcher, Dennis
    [J]. SAMPE JOURNAL, 2023, 59 (06) : 20 - 30
  • [27] Preparation of pre-impregnated continuous carbon fiber reinforced nylon6 filaments and the mechanical properties of 3D printed composites
    Zhuang, Yuexi
    Zou, Bin
    Ding, Shouling
    Wang, Xinfeng
    Liu, Jikai
    Li, Lei
    [J]. MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [28] Mechanical and self-sensing properties of 3D printed continuous carbon fiber reinforced composites
    Ye, Wenguang
    Dou, Hao
    Cheng, Yunyong
    Zhang, Dinghua
    Lin, Sheng
    [J]. POLYMER COMPOSITES, 2022, 43 (10) : 7428 - 7437
  • [29] Processing and mechanical properties of carbon fiber fabric reinforced nylon 6 composites
    Wu, Yuxia
    Zhu, Shu
    Xu, Yingkai
    Jing, Pengzhan
    Yu, Muhuo
    Zhan, Yage
    Yang, Yang
    [J]. Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2015, 31 (10): : 92 - 98
  • [30] Improving Strength of Carbon Fiber Grafted Carbon Nanotube Reinforced Thermoplastic Composites by 3D-Printed Molding
    Ruonan Wang
    Haihong Wu
    Ziyue Guo
    Chuntai Liu
    Changyu Shen
    [J]. Journal of Harbin Institute of Technology(New series), 2019, 26 (02) : 71 - 79