Investigation of zigzag line defects in friction stir welding of SS304 stainless steel

被引：6
|
作者：
Xiao, Chuanjun [1 ]
Taheri, Morteza [2 ]
Alizadeh, Hamed [3 ]
Palay, Mohammad Ali [3 ]
Zhang, Hongwei [1 ]
机构：
[1] Xijing Univ, Sch Mech Engn, Xian 710123, Peoples R China
[2] Iranian Res Org Sci & Technol IROST, Dept Adv Mat & New Energies, Tehran, Iran
[3] Islamic Azad Univ, Dept Mat Engn, Karaj Branch, Karaj, Iran
来源：
MATERIALS LETTERS | 2023年 / 351卷
关键词：
Friction stir welding; Zigzag line defect; Fracture toughness; Microstructure; Texture;
D O I：
10.1016/j.matlet.2023.135042
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The zigzag line defect (ZLD) formed in the stir zone (SZ) affects the microstructural and mechanical properties of the materials welded by friction stir welding (FSW). In this research, the cause of ZLD formation in the FSW of SS304 steel was analyzed. The results showed that this defect is formed under incomplete penetration conditions. Under such conditions, oxygen enters the SZ from the incomplete penetration site and linearly creates micro- and nano-voids of metal oxides. The formed oxide voids had high hardness, but due to crack nucleation, they showed low fracture toughness.
引用
收藏
页数：4
相关论文
共 50 条
  • [41] A comparative investigation of butt friction stir welding of aluminium alloys, AA 1100 and AA 7075, with AISI 304 stainless steel
    Abhijit Datta
    Ankit Shrivastava
    Nilrudra Mandal
    Himadri Roy
    Shitanshu Shekhar Chakraborty
    Welding in the World, 2023, 67 : 1449 - 1465
  • [42] Microstructures in Friction Stir Welded 304 Austenitic Stainless Steel
    H. Kokawa
    S. H. C. Park
    Y. S. Sato
    K. Okamoto
    S. Hirano
    M. Inagaki
    Welding in the World, 2005, 49 (3-4) : 34 - 40
  • [43] Investigation of welding defects in friction stir spot welding of plastics
    Kastan, Alim
    JOURNAL OF ELASTOMERS AND PLASTICS, 2023, 55 (04): : 457 - 474
  • [44] Artificial Neural Network Application to the Friction Stir Welding of Al 6061 Alloy to Stainless Steel 304
    HASSAN Nassef
    Computer Aided Drafting,Design and Manufacturing, 2008, Design and Manufacturing.2008 (01) : 26 - 31
  • [45] Effects of Welding Parameters in Friction Stir Welding of Stainless Steel and Aluminum
    Goel, Pankul
    Mohd, A. W.
    Sharma, Nidhi
    Siddiquee, A. N.
    Khan, Zahid A.
    ADVANCES IN INDUSTRIAL AND PRODUCTION ENGINEERING, 2019, : 815 - 823
  • [46] Phase-field simulation of microstructure evolution during friction stir welding of 304 stainless steel
    Sadeghian, Behzad
    Taherizadeh, Aboozar
    Atapour, Masoud
    Saeidi, Navid
    Alhaji, Amir
    MECHANICS OF MATERIALS, 2021, 163
  • [47] Dissimilar lap joining of 304 stainless steel to CP-Ti employing friction stir welding
    Fazel-Najafabadi, M.
    Kashani-Bozorg, S. F.
    Zarei-Hanzaki, A.
    MATERIALS & DESIGN, 2011, 32 (04) : 1824 - 1832
  • [48] Evaluation of dissimilar 7075 aluminum/AISI 304 stainless steel joints using friction stir welding
    Joshani E.
    Beidokhti B.
    Davodi A.
    Amelzadeh M.
    Journal of Alloys and Metallurgical Systems, 2023, 3
  • [49] Friction stir welding of AA2024-T3 and SS304 alloys: microstructural analysis, microhardness evaluation, and tensile performance
    Mir, Fayaz Ahmad
    Khan, Noor Zaman
    Mukhtar, Zahid
    Badruddin, Irfan Anjum
    Kamangar, Sarfaraz
    Nisar, Lubaid
    PHYSICA SCRIPTA, 2024, 99 (10)
  • [50] The effect of friction stir welding on the microstructure and mechanical properties of the dissimilar SS304 and Al7075-T6 alloy joints
    Kumar, Ranjan
    Manjaiah, M.
    Davidson, M. J.
    WELDING INTERNATIONAL, 2023, 37 (11) : 643 - 654
12345