Investigation of zigzag line defects in friction stir welding of SS304 stainless steel

被引：6

作者：

Xiao, Chuanjun ^{[1
]}

Taheri, Morteza ^{[2
]}

Alizadeh, Hamed ^{[3
]}

Palay, Mohammad Ali ^{[3
]}

Zhang, Hongwei ^{[1
]}

机构：

[1] Xijing Univ, Sch Mech Engn, Xian 710123, Peoples R China

[2] Iranian Res Org Sci & Technol IROST, Dept Adv Mat & New Energies, Tehran, Iran

[3] Islamic Azad Univ, Dept Mat Engn, Karaj Branch, Karaj, Iran

来源：

MATERIALS LETTERS | 2023年 / 351卷

关键词：

Friction stir welding; Zigzag line defect; Fracture toughness; Microstructure; Texture;

D O I：

10.1016/j.matlet.2023.135042

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The zigzag line defect (ZLD) formed in the stir zone (SZ) affects the microstructural and mechanical properties of the materials welded by friction stir welding (FSW). In this research, the cause of ZLD formation in the FSW of SS304 steel was analyzed. The results showed that this defect is formed under incomplete penetration conditions. Under such conditions, oxygen enters the SZ from the incomplete penetration site and linearly creates micro- and nano-voids of metal oxides. The formed oxide voids had high hardness, but due to crack nucleation, they showed low fracture toughness.

引用

页数：4

共 50 条

[31] High Quality-High Speed Friction Stir Welding of 304 Austenitic Stainless Steel
Ishikawa, Takeshi
Fujii, Hidetoshi
Genchi, Kazuo
Iwaki, Shunichi
Matsuoka, Shigeki
Nogi, Kiyoshi
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2008, 94 (11): : 539 - 544
[32] Butt Friction Stir Spot Welding of SUS304 Stainless Steel Thin Sheets
Yoshimura H.
Shimmyo K.
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2024, 90 (07): : 549 - 553
[33] Joining of CP-Ti to 304 stainless steel using friction stir welding technique
Fazel-Najafabadi, M.
Kashani-Bozorg, S. F.
Zarei-Hanzaki, A.
MATERIALS & DESIGN, 2010, 31 (10) : 4800 - 4807
[34] Formability of SS304 stainless steel foil at elevated strain-rate
Liu, Wei
Zhang, Min
Li, Jiaqi
Wu, Jinjie
Meng, Zhenghua
Huang, Shangyu
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 7471 - 7482
[35] Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium
Gotawala, Nikhil
Shrivastava, Amber
JOURNAL OF MATERIALS SCIENCE, 2021, 56 (34) : 19180 - 19198
[36] Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium
Nikhil Gotawala
Amber Shrivastava
Journal of Materials Science, 2021, 56 : 19180 - 19198
[37] Microstructure and Mechanical Properties of Pressure-Quenched SS304 Stainless Steel
Wang, Peng
Zhang, Yang
Yu, Dongli
MATERIALS, 2019, 12 (02)
[38] Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel
Jafarzadegan, M.
Feng, A. H.
Abdollah-zadeh, A.
Saeid, T.
Shen, J.
Assadi, H.
MATERIALS CHARACTERIZATION, 2012, 74 : 28 - 41
[39] Corrosion resistance of friction stir welded 304 stainless steel
Park, SHC
Sato, YS
Kokawa, H
Okamoto, K
Hirano, S
Inagaki, M
SCRIPTA MATERIALIA, 2004, 51 (02) : 101 - 105
[40] A comparative investigation of butt friction stir welding of aluminium alloys, AA 1100 and AA 7075, with AISI 304 stainless steel
Datta, Abhijit
Shrivastava, Ankit
Mandal, Nilrudra
Roy, Himadri
Chakraborty, Shitanshu Shekhar
WELDING IN THE WORLD, 2023, 67 (06) : 1449 - 1465

← 1 2 3 4 5 →