Determination of Loading and Residual Stresses on Offshore Jacket Structures by X-ray Diffraction

被引:3
|
作者
Schubnell, Jan [1 ]
Carl, Eva [1 ]
Widerspan, Viktor [2 ]
Collmann, Mareike [3 ]
机构
[1] Fraunhofer Inst Mech Mat, Woehlerstr 11, D-79108 Freiburg, Germany
[2] Fraunhofer Inst Wind Energy Syst, Merkurstr 13, D-30419 Hannover, Germany
[3] Leibniz Univ Hannover, Fac Civil Engn & Geodet Sci, Test Ctr Support Struct, Merkurstr 13, D-30419 Hannover, Germany
关键词
offshore jacket structures; welding joints; residual stresses; fatigue loading; FATIGUE-STRENGTH; RELAXATION;
D O I
10.3390/jmse11071304
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
As basements of offshore wind turbines (OWTs) in deep water (>50 m), jacket structures are an economic alternative to monopiles. For this reason, the structural durability of jackets has become more important. In such structures, welded tubular joints are weak points for fatigue design. The harmful effect of tensile residual stresses in welding joints is well known. For these reasons, the residual stresses and the loading stresses of offshore jacket structures were determined by X-ray diffraction (XRD) using a mobile diffractometer. This allows us to directly determine the load stress at the fatigue-critical locations, namely at the weld toe at the testing rig. High tensile residual stresses up to 250 MPa were determined in a welded (and unloaded) condition. At a loaded structure (10,000 load cycles), a lower residual stress level was determined. During loading, a local increase in the stress at the welded joint that is between 1.4 and 4 times higher than the applied nominal stress was determined. Furthermore, it is shown that additional treatment (grinding and clean blasting) influences the local stress state significantly.
引用
收藏
页数:10
相关论文
共 50 条
  • [11] In-situ measurement of loading stresses with X-ray diffraction for yield locus determination
    A. Güner
    B. Zillmann
    T. Lampke
    A. E. Tekkaya
    International Journal of Automotive Technology, 2014, 15 : 303 - 316
  • [12] A Deconvolution Method for the Mapping of Residual Stresses by X-Ray Diffraction
    Tajdary, P.
    Morin, L.
    Braham, C.
    Gonzalez, G.
    EXPERIMENTAL MECHANICS, 2022, 62 (08) : 1349 - 1362
  • [13] MEASUREMENT OF RESIDUAL STRESSES BY X-RAY DIFFRACTION TECHNIQUES.
    James, M.R.
    Cohen, J.B.
    Treatise on Materials Science and Technology, 1980, 19 (pt A): : 1 - 62
  • [14] A Deconvolution Method for the Mapping of Residual Stresses by X-Ray Diffraction
    P. Tajdary
    L. Morin
    C. Braham
    G. Gonzalez
    Experimental Mechanics, 2022, 62 : 1349 - 1362
  • [16] Investigation of residual stresses in microsystems using X-ray diffraction
    Kämpfe, B
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 288 (02): : 119 - 125
  • [17] X-RAY DETERMINATION OF RESIDUAL STRESSES IN ELECTRODEPOSITED COATINGS
    BUSH, GW
    READ, HJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1964, 111 (03) : 289 - 296
  • [18] X-RAY DETERMINATION OF RESIDUAL STRESSES IN ELECTRODEPOSITED COATINGS
    BUSH, GW
    READ, JH
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1961, 108 (08) : C170 - C170
  • [19] X-ray diffraction determination of residual stresses in functionally graded WC-Co composites
    Larsson, C
    Odén, M
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2004, 22 (4-5): : 177 - 184
  • [20] Measurement of residual stresses in CFRP laminates by X-ray diffraction method
    C Balasingh
    Vandana Singh
    Bulletin of Materials Science, 1997, 20 : 325 - 332